Abstract:Adjacent excavations may have adverse impacts on the existing tunnels. Due to the increasing demand for building excavations in close proximity to existing metro tunnels, ensuring the safety and integrity of tunnel structures is a major challenge for city designers and geotechnical engineers. Urban metro tunnels in soft areas of Chinese cities are often constructed using shield tunnelling technology, and the installed precast reinforcement concrete segmental lining are generally connected together by various steel bolts. Due to the presence of joints, the overall tunnel stiffness, including the bending stiffness and shearing stiffness, are significantly reduced. Due to the reduction in shearing stiffness, the tunnel longitudinal deformation can be decomposed into two distinct modes: a bending mode and a shearing dislocation mode. However, current methods for predicting tunnel longitudinal responses to adjacent excavations generally simplify a tunnel as an Euler-Bernoulli beam, which only considers the bending effect and ignores the shearing deformation of jointed tunnels. Moreover, tunnel-ground interactions are commonly considered through the Winkler foundation model, which is unable to account for the interactions of adjacent springs and leads to overestimations of shear forces and bending moments in shield tunnels. In this paper, a new analytical method is proposed that uses a Timoshenko beam to simulate jointed shield tunnel responses when subjected to an adjacent excavation, which can consider both the bending and shearing effects of a shield tunnel. The tunnel-ground interaction is considered by introducing Pasternak two-parameter foundation, which is able to further take account for the interaction between adjacent springs. The tunnel-excavation interaction is analyzed using a two-stage analysis method. First, the excavation-induced unloading stress on the existing tunnel is computed using Mindlin’s solution. Second, the tunnel longitudinal deformation due to the corresponding stress is calculated using finite difference method. The effectiveness of the proposed approach is validated by two well-document case histories, including finite element analysis and field measurement. The predicted results are also compared with those obtained using the traditional methods. Based on the verified analytical solution, a parametric analysis is also conducted to investigate the effects of key factors on the responses of existing tunnels, including excavation-tunnel relative position, ground Young’s modulus and equivalent shearing stiffness.

Effect of nearby undercrossing tunneling on the deformation of existing metro tunnel and construction control

Simplified analytical method for evaluating the effects of adjacent excavation on shield tunnel considering the shearing effect

Analysis of the Effects on the Adjacent Underground Pipelines by Shield Tunneling Construction

Analysis for Ground Deformation Induced by Undercrossed Shield Tunnels at a Small Proximity Based on Equivalent Layer Method

Measurement And Analysis Of The Effect Of Shield Tunnelling Of Hangzhou Subway On The Adjacent Building

Structural Monitoring of Metro Infrastructure During Shield Tunneling Construction.

Influence of the Approaching Construction of Underlying Shield Tunnels on Overlying Metro Tunnels

Controlling Of Construction Parameters On Metro Shield Tunneling Traversing Adjacently Under The Existing Subway Tunnel

Field Measurement Analysis of the Influence of Double Shield Tunnel Construction on Reinforced Bridge

Characteristics and Countermeasures of Tunnel Heave Due to Large-Diameter Shield Tunneling Underneath

Construction techniques and mechanical behavior of newly-built large-span tunnel ultra-short distance up-crossing the existing shield tunnel with oblique angle

Study on Effect of Double-line Parallel Shield Tunneling Side-crossing on Adjacent Frame Structures

Performance of Existing Subway Tunnels Undercrossed by Four Closely Spaced Shield Tunnels

Analysis of the displacement caused by shield-driven construction adjacent to the existing tunnel

Numerical Study on the Disturbance Effect of Short-Distance Parallel Shield Tunnelling Undercrossing Existing Tunnels

Monitoring and Analysis of the Impact of Adjacent Bridge Pile Construction on Subway Tunnels

Geotechnical Influence on Existing Subway Tunnels Induced by Multiline Tunneling in Shanghai Soft Soil

An in-tunnel grouting protection method for excavating twin tunnels beneath an existing tunnel

Monitoring Data Analysis of Disturbing Effect Caused by Shield-Driven over Operating Tunnel

Study on the Influence of an Under-Crossing Parallel Double-Line Shield Tunnel on the Existing Tunnel Structure

Analysis of the settlement of an existing tunnel induced by shield tunneling underneath