Abstract:Polysulfide sealants have high resistance against ultra violet radiation and environment,exhibit good low-temperature properties,low water-vapor transmission,and resist against solvents and chemicals.They were many publications on the characterization of metal peroxides-cured polysulfide,reporting the results of thermogravimetry analysis,dynamic mechanical analysis,tensile strength and hardness test.Although the polysulfide rubber has the advantage of lower cost,they faced the strong challenges from silicone and polyurethane-based sealants.One of the main reasons is their relatively poor tensile properties and weak adhesive strength.The new multi-alkoxyorganosilane coupling agents with hydroxyl-amine group(MAGHA)are synthesized by addition of γ-aminopropyltriethoxysilane(KH550) and γ-glycidoxypropyltrimethoxysilane(KH560).The influence to the polysulfide sealants by the multi-alkoxyorganosilane coupling agents with hydroxyl-amine group as additive are studied.With a small amount of MAGHA,the commercial polysulfide-based sealants have significant improvement in mechanical properties.In our polysulfide composition,the methoxy or ethoxy can be reacted with hydroxyl on the surface of the filler.Hydroxy group of the new multi-alkoxyorganosilane coupling agents or water produced by oxidation between polysulfide and MnO2 can make MAGHA to create the three-dimensional structure of polysiloxane through MAGHA polycondensation.The three-dimensional structure of polysiloxane has ability to package the surrounding of fillers and enhance the chain of polysulfide sealant through interreacted pendent with hydroxyl-amine group of MAGHA which can improve the tensile strength and ultimate elongation of sealant simultaneously.The test results show that 1% of multi-alkoxyorganosilane coupling agents with hydroxyl-amine group could help increasing 30% in the ultimate elongation and 70% in the tensile strength of the polysulfide sealants.The adhesive strength to steel also increased significantly.Since MAGHA reinforcement significantly increased the bulk tensile strength of polysulfide sealants,while MAGHA has the special hydroxyl-amine structure,which is the foundation of epoxy resin for its high properties of adhesive.When KH560 added to polysulfide sealants,the adhesive strength has no significant changed.Dynamic mechanical thermal analysis shows the Tg of polysulfide sealant have increased about 5℃.It may due to the increased cross-link by the result of the new multi-alkoxyorganosilane coupling agents with hydroxyl-amine group effect to —SH and fillers.The movements of main chain are limited.It also increased the ability on water.From water absorption test,the polysulfide sealants added MAGHA appear excellent properties of water absorption and resistance.After 18-day immersion,the polysulfide sealants before modification absorbed more than 6.10% water,but only absorbed 4.20% water after modification.This due to the siloxane structure surrounding filler.And the results indicate that the introduction of the MAGHA has no appreciable influence on oil resistance of polysulfide sealants.This new kind multi-alkoxyorganosilane coupling agents with hydroxyl-amine group have the similar effect of modification to the other resins are expected.The continue work are going on.

Modification of Polysulfide Sealant with Polysulfide Polythio-Urethane-Urea

Modification of polysulfide sealant with multi-alkoxyorganosilane coupling agents with hydroxyl-amine group

Synthesis and properties of polysulfide sealant containing thio-urea

Enhanced Compatibility and Thermo-Oxidative Stability of Silicone Rubber/Ethylene–Propylene Terpolymer Composites Via in Situ Interface Coupling

Improvement in Compression Performance of the Polysulfide Sealant by Thiol‐acrylate Reaction

Strengthening the mechanical properties of polysulfide adhesives by introducing polyurethane

The research of polysulfide sealant modified with composite fillers

The Structural and Mechanical Properties of Polysulfide‐based Polyurea

Self-Healable and Reprocessable Polysulfide Sealants Prepared from Liquid Polysulfide Oligomer and Epoxy Resin.

Synthesis and Characterization of Eugenol‐based Silicone Modified Waterborne Polyurethane with Excellent Properties

Mechanical and surface properties of polysulfide-based polyurea modified with aminoethylaminopropyl poly(dimethylsiloxane)

Study on the Curing and Thermal Aging Properties of Polysulfide Sealent

The Effect of Epoxy Resin to Reduce the Compression Set of Polysulfide Sealant

The research of polysulfide sealant modified with inorganic fillers

Effect of filler on the compression set, compression stress-strain behavior, and mechanical properties of polysulfide sealants

Self-healing, reprocessing and sealing abilities of polysulfide-based polyurethane

Effect of Surface Functionalization of Molybdenum Disulfide Nanosheets with Polysulfone on Cyanate Ester Nanocomposites

Compression Set Property And Stress-Strain Behavior During Compression Of Polysulfide Sealants

Synthesis, characterization, curing, thermophysical and mechanical properties of ethylene dichloride-based polysulfide polymers

The influence of the curing rate on the compression performances of polysulfide rubber

Influences of different polysulfide rubbers on compressibility of polysulfide sealant