Abstract:Polysulfide sealants have high resistance against ultra violet radiation and environment,exhibit good low-temperature properties,low water-vapor transmission,and resist against solvents and chemicals.They were many publications on the characterization of metal peroxides-cured polysulfide,reporting the results of thermogravimetry analysis,dynamic mechanical analysis,tensile strength and hardness test.Although the polysulfide rubber has the advantage of lower cost,they faced the strong challenges from silicone and polyurethane-based sealants.One of the main reasons is their relatively poor tensile properties and weak adhesive strength.The new multi-alkoxyorganosilane coupling agents with hydroxyl-amine group(MAGHA)are synthesized by addition of γ-aminopropyltriethoxysilane(KH550) and γ-glycidoxypropyltrimethoxysilane(KH560).The influence to the polysulfide sealants by the multi-alkoxyorganosilane coupling agents with hydroxyl-amine group as additive are studied.With a small amount of MAGHA,the commercial polysulfide-based sealants have significant improvement in mechanical properties.In our polysulfide composition,the methoxy or ethoxy can be reacted with hydroxyl on the surface of the filler.Hydroxy group of the new multi-alkoxyorganosilane coupling agents or water produced by oxidation between polysulfide and MnO2 can make MAGHA to create the three-dimensional structure of polysiloxane through MAGHA polycondensation.The three-dimensional structure of polysiloxane has ability to package the surrounding of fillers and enhance the chain of polysulfide sealant through interreacted pendent with hydroxyl-amine group of MAGHA which can improve the tensile strength and ultimate elongation of sealant simultaneously.The test results show that 1% of multi-alkoxyorganosilane coupling agents with hydroxyl-amine group could help increasing 30% in the ultimate elongation and 70% in the tensile strength of the polysulfide sealants.The adhesive strength to steel also increased significantly.Since MAGHA reinforcement significantly increased the bulk tensile strength of polysulfide sealants,while MAGHA has the special hydroxyl-amine structure,which is the foundation of epoxy resin for its high properties of adhesive.When KH560 added to polysulfide sealants,the adhesive strength has no significant changed.Dynamic mechanical thermal analysis shows the Tg of polysulfide sealant have increased about 5℃.It may due to the increased cross-link by the result of the new multi-alkoxyorganosilane coupling agents with hydroxyl-amine group effect to —SH and fillers.The movements of main chain are limited.It also increased the ability on water.From water absorption test,the polysulfide sealants added MAGHA appear excellent properties of water absorption and resistance.After 18-day immersion,the polysulfide sealants before modification absorbed more than 6.10% water,but only absorbed 4.20% water after modification.This due to the siloxane structure surrounding filler.And the results indicate that the introduction of the MAGHA has no appreciable influence on oil resistance of polysulfide sealants.This new kind multi-alkoxyorganosilane coupling agents with hydroxyl-amine group have the similar effect of modification to the other resins are expected.The continue work are going on.

Self-Healable and Reprocessable Polysulfide Sealants Prepared from Liquid Polysulfide Oligomer and Epoxy Resin.

Self-healing, reprocessing and sealing abilities of polysulfide-based polyurethane

Aromatic Amine-Terminated Polysulfide Oligomer: Synthesis And Application In Self-Healable Polyurea

Self-Healing Polysiloxane Elastomer Based on Integration of Covalent and Reversible Networks

Heat-Triggered Poly(Siloxane-Urethane)S Based On Disulfide Bonds For Self-Healing Application

Modification of Polysulfide Sealant with Polysulfide Polythio-Urethane-Urea

An ultrafast self-healing polydimethylsiloxane elastomer with persistent sealing performance

Synthesis, characterization, curing, thermophysical and mechanical properties of ethylene dichloride-based polysulfide polymers

Room-Temperature Self-Healable and Remoldable Cross-linked Polymer Based on the Dynamic Exchange of Disulfide Bonds

Strengthening the mechanical properties of polysulfide adhesives by introducing polyurethane

Preparation of Epoxy Resin with Disulfide-Containing Curing Agent and Its Application in Self-Healing Coating

Preparation of Robust, Room-Temperature Self-Healable and Recyclable Polysiloxanes Based on Hierarchical Hard Domains

A Self-Healing Polysiloxane Elastomer Based on Siloxane Equilibration Synthesized Through Amino-Ene Michael Addition Reaction

The Effect of Epoxy Resin to Reduce the Compression Set of Polysulfide Sealant

Self-healing and malleable waterborne polyurethane bearing aliphatic disulfide linkages with hydrophobic branching chains

Modification of polysulfide sealant with multi-alkoxyorganosilane coupling agents with hydroxyl-amine group

Aromatic Disulfide-Induced Self-Reinforcing Polyurethane Elastomer with Self-Healability

Constructing Self-Healing Polydimethylsiloxane through Molecular Structure Design and Metal Ion Bonding

Self-healing silicon-containing eugenol-based epoxy resin based on disulfide bond exchange: Synthesis and structure-property relationships

Facile Preparation of a Transparent, Self-Healing, and Recyclable Polysiloxane Elastomer Based on a Dynamic Imine and Boroxine Bond

Synthesis and properties of polysulfide sealant containing thio-urea