Abstract:Strengthening the mechanical properties of polysulfide adhesives by introducing polyurethane. Polysulfide adhesives are often subjected to breakage or even fracture caused by highly loaded vibrations and large deformations from the wing, limiting their practical use in aircraft fuel tanks. Inserting polyurethanes into liquid polysulfide systems is a viable approach to strengthening their mechanical properties and avoiding nonuniform dispersion of the curing agent. In this contribution, a series of sulfur‐containing curing agents were prepared by liquid polysulfide and trimethylolpropane tris(3‐mercapto propionate) (TMPMP) to minimize the effect of the polysulfide‐urea (‐NHCOS‐) groups on water resistance. Subsequently, the two‐component polysulfide adhesives were successfully synthesized via the prepolymerization method, and their chemical structure, mechanical properties, and solvent resistance were systematically evaluated. As expected, the large introduction of sulfur linkages and ‐NHCOS‐ groups provided excellent oil resistance and strong mechanical properties for polysulfide adhesives. Notably, Samples 2‐4 exhibited the highest tensile strength of 1.11 ± 0.02 MPa, the greatest shear strength of 1.87 ± 0.04 MPa, and the best hardness of 81 ± 2 Shore A, with 122.0%, 523.3%, and 170.0% improvement over the control, respectively. Furthermore, the oil absorption rate of all samples was less than 3.0%, and their tensile strength remained almost unchanged after 30 days of immersion than before. We believe our paradigm can provide a valuable guideline for designing high‐performance polysulfide adhesives.

Synthesis, characterization, curing, thermophysical and mechanical properties of ethylene dichloride-based polysulfide polymers

Synthesis of ethylene dichloride-based polysulfide polymers: investigation of polymerization yield and effect of sulfur content on solubility and flexibility

Sodium sulfide-based polysulfide polymers: synthesis, cure, thermal and mechanical properties

The Structural and Mechanical Properties of Polysulfide‐based Polyurea

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Strengthening the mechanical properties of polysulfide adhesives by introducing polyurethane

The preparation and physical properties of polysulfide-based elastomers through one-pot thiol-ene click reaction

Synthesis and properties of polysulfide sealant containing thio-urea

Mechanical properties of polysulfide elastomer cured with an acrylate resin cured

Halogenated polyethersulfone sulfides

Self-Healable and Reprocessable Polysulfide Sealants Prepared from Liquid Polysulfide Oligomer and Epoxy Resin.

Dynamic Sulfur-Rich Polymers from Elemental Sulfur and Epoxides

Comparative Study on Novel Poly(alkylene Sulfide)s with Modulated Thioether Linkages and Flexible Alkylene Spacers

Polymerization of elemental sulfur with various divinyl and diallyl monomers and properties of the copolymers

Aromatic Amine-Terminated Polysulfide Oligomer: Synthesis And Application In Self-Healable Polyurea

Synthesis, characterization and properties of the polysiloxane-based episulfide resin

Study on the Curing and Thermal Aging Properties of Polysulfide Sealent

Mechanical and surface properties of polysulfide-based polyurea modified with aminoethylaminopropyl poly(dimethylsiloxane)

Step‐growth Polymerization of Aziridines with Elemental Sulfur: Easy Access to Linear Polysulfides and Their Use as Recyclable Adhesives

The Effect of Epoxy Resin to Reduce the Compression Set of Polysulfide Sealant

THE SYNTHESIS AND CHARACTERIZATION OF POLYESTERS CONTAINING SILANE IN THE MOLECULAR MAIN-CHAIN