Abstract:Effective applications must be found for sulfur, a widely available and inexpensive element. Over the last decade, copolymers with unsaturated comonomers have been prepared via so-called inverse vulcanization. In this work, a sulfur copolymer with a circular and biosourced di-pyrrole compound was obtained for the first time and was used as the sole crosslinking agent of an unsaturated elastomer. Pyrrole compounds (PyCs) were synthesized via the Paal–Knorr reaction of 2,5-hexanedione (HD) and hexamethylenediamine (HMD) or ethylenediamine (EDM). The PyCs were obtained without using solvents or catalysts in high yield and with water as the only co-product. Poly(S- co -HMDP) and poly(S- co -EDP) copolymers were prepared under the typical conditions of inverse vulcanization. Throughout the entire synthetic pathway, the overall yield was up to 92% and the atom efficiency was up to 73%. The E -factor evaluated for organic compounds was almost null. The sulfur weight content in the copolymers ranged from 40% to 80% and the average number of sulfur atoms in the sequences ranged from 3 to 17. The copolymers were found to be amorphous with a glass transition temperature ranging from −2 to 38 °C, increasing with the content of the pyrrole ring. The number average molecular weight was found to be in the range from 1500 to 9000 g mol −1 . The molecular weight distribution was pretty narrow, with values lower than 2. NMR investigation suggested that the β position of the pyrrole ring reacted with sulfur atoms. A poly(S- co -HMDP) copolymer with an average sequence of 3 sulfur atoms was used as the sole crosslinking agent in a composite based on an unsaturated elastomer such as poly(styrene- co -butadiene) from anionic polymerization. More efficient crosslinking was obtained by promoting the ionic reaction of sulfur with elastomer chains by using 1,5-diazabicyclo(5.4.0)undec-7-ene. These results pave the way for the synthesis of a wide variety of sulfur copolymers with comonomers containing pyrrole rings for the sustainable crosslinking of elastomers, avoiding the use of oil-based accelerators.

Polymerization of elemental sulfur with various divinyl and diallyl monomers and properties of the copolymers

One‐Pot Construction of Sulfur‐Rich Thermoplastic Elastomers Enabled by Metal‐Free Self‐Switchable Catalysis and Air‐Assisted Coupling

Sulfur-containing Polymers Derived from SO2: Synthesis, Properties, and Applications

Thiol-Yne Click Polymerization: Regio- And Stereoselective Synthesis Of Sulfur-Rich Acetylenic Polymers With Controllable Chain Conformations And Tunable Optical Properties

Copolymerization Involving Sulfur-Containing Monomers

Using Carbon Dioxide and Its Sulfur Analogues As Monomers in Polymer Synthesis

Sulfur Conversion To Multifunctional Poly(O-Thiocarbamate)S Through Multicomponent Polymerizations Of Sulfur, Diols, And Diisocyanides

Sulfur Copolymers (SDIB) from Inverse Vulcanization of Elemental Sulfur (S8) for Polymer Blend

Terpolymerization of Elemental Sulfur Waste with Propylene Oxide and Carbon Disulfide as a Strategy where Copolymerization fails

Dynamic Sulfur Bonds Initiate Polymerization of Vinyl and Allyl Ethers at Mild Temperatures

Synthesis Of Sulfur-Containing Polyacetylenes And Fabrication Of Their Hybrids With Zno Nanoparticles

Dynamic Sulfur-Rich Polymers from Elemental Sulfur and Epoxides

A sulfur copolymer with a pyrrole compound for the crosslinking of unsaturated elastomers

Synthesis of ethylene dichloride-based polysulfide polymers: investigation of polymerization yield and effect of sulfur content on solubility and flexibility

Precisely Alternating Copolymerization of Episulfides and Isothiocyanates: A Practical Route to Construct Sulfur-Rich Polymers

Synthesis, characterization, curing, thermophysical and mechanical properties of ethylene dichloride-based polysulfide polymers

Ring‐Opening Terpolymerisation of Elemental Sulfur Waste with Propylene Oxide and Carbon Disulfide via Lithium Catalysis

Converting inorganic sulfur into degradable thermoplastics and adhesives by copolymerization with cyclic disulfides

Step‐growth Polymerization of Aziridines with Elemental Sulfur: Easy Access to Linear Polysulfides and Their Use as Recyclable Adhesives

Closed-loop Chemically Recyclable Covalent Adaptive Networks Derived from Elementary Sulfur

Transforming Element Sulfur to High Performance Closed‐Loop Recyclable Polymer via Proton Transfer Enabled Anionic Hybrid Copolymerization