Abstract:Lithium ion batteries are widely used in portable electronic devices and electric vehicles. However, safety is one of the most important issues for the Li-ion batteries’ use. Some cathode materials, such as LiCoO2, are thermally unstable in the charged state. Upon decomposition these cathode materials release O2, which could react with organic electrolyte, leading to a thermal runaway. Thus, the safety of the Li-ion battery depends on the interaction between the cathode materials and the organic electrolyte. In this work, we have investigated three types of cathode materials: layered oxide LiNi0.8Co0.15Al0.05O2 (NCA); olivine phosphates LiFePO4, Mn-rich LiFe1-yMnyPO4 (LMFP); and multielectron vanadyl phosphates VOPO4, LiVOPO4 and Li2VOPO4. The thermal behavior of the materials with and without electrolyte (1M LiPF6 in EC: DMC=1:1) was studied by differential scanning calorimetry (DSC) and thermogravimetric analysis coupled with mass spectroscopy (TGA-MS). The solid products of the thermal reactions were further studied by x-ray diffraction. The results indicate that electrolyte decomposes between 250 ºC and 300 ºC, releasing 391 J/g heat (Fig.1 a). NCA (charged to 4.6 V) starts to decompose at 220 ºC, generating large amounts of O2 and 674 J/g heat without the electrolyte. When NCA is heated with the electrolyte, the heat released is close to 800 J/g (Fig.1 b), which could result in a thermal runaway of the battery. LMFP charged to 4.4 V (MFP) partially decomposes below 350 ºC and gives off 476 J/g heat in the presence of the electrolyte (Fig.1 c). On the other hand, VOPO4 and its lithiated compounds (LiVOPO4, Li2VOPO4) have the best thermal stability: the heat generated by any of them without electrolyte is less than 100 J/g when heated up to 350 ºC. In the presence of the electrolyte, the heat released is also significantly less than that of NCA and MFP (Fig.1 d). We will also present evidence from the first principles phase diagrams that support the experimental conclusions, including predicted O2 evolution temperatures and resulting phase equilibria. This work was supported as part of the NorthEast Center for Chemical Energy Storage (NECCES), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012583. Figure 1

Thermal and electrochemical stability of cathode materials in solid polymer electrolyte

Thermal Stability of Polyethylene Oxide Electrolytes in Lithium Nickel Manganese Cobalt Oxide Based Composite Cathodes

Enabling Stable Cycling of 4.2 V High‐Voltage All‐Solid‐State Batteries with PEO‐Based Solid Electrolyte

Thermal Stability of LiPF6-based Electrolyte and Effect of Contact with Various Delithiated Cathodes of Li-ion Batteries

Thermal Stability and Reactivity of Cathode Materials for Li-Ion Batteries

Excellent Thermal Stability of VOPO4 As Cathode for Lithium-Ion Battery

About the Compatibility between High Voltage Spinel Cathode Materials and Solid Oxide Electrolytes as a Function of Temperature

Probing Thermal Stability of Li-Ion Battery Ni-Rich Layered Oxide Cathodes by Means of Operando Gas Analysis and Neutron Diffraction

Increasing the electrochemical stability window for polyethylene-oxide-based solid polymer electrolytes by understanding the affecting factors

Coupling-Agent-Coordinated Uniform Polymer Coating on LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> for Improved Electrochemical Performance at Elevated Temperatures

Insights Into the Interfacial Degradation of High-Voltage All-Solid-State Lithium Batteries

Stabilizing Polyether Electrolyte with 4 V Metal Oxide Cathode by Nanoscale Interfacial Coating.

Improving interfacial stability by in situ protective layer formation in 4.2V poly(ethylene oxide) based solid state lithium batteries

Electrochemical stability of lithium bis(oxatlato) borate containing solid polymer electrolyte for lithium ion batteries

Thermal Stabilities of LixCoO2 and its Coexisting with LiPF6/EC + DEC Electrolyte

Experimental Study on Pyrolysis Kinetics and Thermal Stability of Li (Ni<sub>1/3</sub>Co<sub>1/3</sub>Mn<sub>1/3</sub>)O<sub>2</sub> Cathode Material at Different State of Charge

Synthesis and Properties of Poly-Ether/Ethylene Carbonate Electrolytes with High Oxidative Stability

Unveiling thermal decomposition kinetics of Single-Crystalline Ni-Rich LiNi0.88Co0.07Mn0.05O2 cathode for safe Lithium-Ion batteries

High-voltage stability and electrochemical performance of polyacrylic acid-xanthan gum copolymer-reinforced LiCoO2 cathode material

Thermal stability of active electrode material in contact with solid electrolyte