Abstract:Recently, the large-scale deployment of electric vehicles (EVs) and stationary battery systems has put forward urgent requests for rechargeable batteries with higher energy/power density and longer lifespans. As such, next-generation Li-ion batteries (LiBs) are expected to meet these requirements. The possibility of using Ni-rich high-capacity cathode materials (NMC) can help to achieve that goal, however, they still suffer from significant capacity fade via several chemical and mechanical degradation modes. One is crack formation within secondary particles which leads to parasitic reactions that evolve oxygen and potentially initiate the formation of inactive crystal structures. LiBs mechanical and chemical degradation mechanisms can be extended by applying protective coatings to the cathode’s surface. Many studies explore atomic layer deposition (ALD) for this purpose. However, the complementary molecular layer deposition (MLD) technique might offer the benefit of depositing flexible hybrid coatings that can accommodate potential volume changes of the electrode during the battery cycling. This study reports the deposition of novel organic-inorganic films via the ALD-MLD method. Characterization analysis such as FTIR, XPS, SEM-EDS, and TEM confirmed the film deposition on the surface of the NMC electrode. Besides, the electrochemical results showed the enhancement of the coated electrode, as evidenced by providing a longer life with a 93% capacity retention after 150 cycles (3.0-4.4 V vs. Li/Li+), while the uncoated one retained only 83% of its initial capacity. Moreover, in situ dilatometry showed irreversible volume change for uncoated NMC while it was mostly reversible for coated ones during the cycling. It revealed the dilation behavior of the electrode, resulting in crack formation, which is significantly suppressed for the coated samples. Stable cycling of Ni-rich cathode materials in crucial conditions such as high voltage windows and elevated temperatures is still extremely challenging. To evaluate this, in situ dilatometry was performed at elevated temperatures (40 °C and 55 °C) and higher voltage ranges (3.0-4.6 V). The results confirmed that in both conditions, the dilation behavior of the coated sample is still under control while the capacity is comparable to the uncoated sample. This revealed that the coatings present good lithium-ion kinetics and reduce electrolyte decomposition. Overall, this work showed the liability of the ALD-MLD films deposited on NMC electrodes to mitigate the degradation mechanisms and provides insight into a method that seems promising as a protective and elastic coating for future high-energy lithium-ion battery cathodes. Figure 1

Stabilizing Polyether Electrolyte with 4 V Metal Oxide Cathode by Nanoscale Interfacial Coating.

Interfacial Engineering for Stabilizing Polymer Electrolytes with 4V Cathodes in Lithium Metal Batteries at Elevated Temperature

Electrochemical performance and thermal stability analysis of LiNixCoyMnzO2 cathode based on a composite safety electrolyte

Colloid Electrolyte Containing Li3P Nanoparticles for Highly Stable 4.7 V Lithium Metal Batteries

Designing an Al-Rich In Situ Coating for Stabilizing High-Energy-Density Li Metal Battery Electrodes via Electrolyte Modulation

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Tailoring Stable PEO‐Based Electrolyte/Electrodes Interfaces via Molecular Coordination Regulating Enables 4.5 V Solid‐State Lithium Metal Batteries

Improving the Interfacial Stability of Ultrahigh-Nickel Cathode with PEO-based Electrolyte by Targeted Chemical Reactions

Improving the Interfacial Stability of Ultrahigh-Nickel Cathodes with PEO-based Electrolytes by Targeted Chemical Reactions

Stabilizing and understanding the interface between nickel-rich cathode and PEO-based electrolyte by lithium niobium oxide coating for high-performance all-solid-state batteries

Aligned Li+ Tunnels in Core-shell Li(NixMnyCoz)O2@LiFePO4 Enhances Its High Voltage Cycling Stability as Li-ion Battery Cathode.

(Oxalato)borate: The key ingredient for polyethylene oxide based composite electrolyte to achieve ultra-stable performance of high voltage solid-state LiNi0.8Co0.1Mn0.1O2/lithium metal battery

In Situ Surface Protection for Enhancing Stability and Performance of LiNi0.5Mn0.3Co0.2O2 at 4.8 V: the Working Mechanisms

An Ion Conducting ZIF-8 Coating Protected PEO Based Polymer Electrolyte for High Voltage Lithium Metal Batteries

Constructing Nano‐Interlayer Inhibiting Interfacial Degradation toward High‐Voltage PEO‐Based All‐Solid‐State Lithium Batteries

Dual-Salt-Containing Polymer Interlayer Stabilizes Solid-State Li-Metal Batteries with LiCoO 2 Cathodes

Having Your Cake and Eating It Too: Electrode Processing Approach Improves Safety and Electrochemical Performance of Lithium-Ion Batteries

Electrolyte Regulating Toward Stabilization of Cobalt-Free Ultrahigh-Nickel Layered Oxide Cathode in Lithium-Ion Batteries

Stabilized Positive Electrode Material to Enable High Energy/Power Density Lithium-Ion Batteries

Stabilizing a high-voltage LiNi0.5Mn1.5O4 cathode towards all solid state batteries: a Li-Al-Ti-P-O solid electrolyte nano-shell with a host material

In-situ electrochemical passivation for constructing high-voltage PEO-based solid-state lithium battery