Abstract:The poly (ethylene oxide) (PEO)‐based electrolyte with excellent anode and cathode interfacial stability is constructed via the molecular coordination modulation induced by difluorobis(oxalato)phosphate (DFBOP). The introduction of DFBOP can facilitate the in situ generation of robust inorganic‐rich interphase involving LiF, LixPOyFz, and P─O on electrode surfaces, enabling the stable operation of lithium (Li) symmetric cells over 7000 h and 4.5 V Li/LiNi0.8Co0.1Mn0.1O2 cells over 100 cycles. Solid‐state lithium metal batteries (SSLMBs) with poly (ethylene oxide) (PEO)‐based electrolytes have increasingly become one of the most promising battery technologies due to high energy density and safety. However, adverse electrode/electrolyte interface compatibility issues hinder further application. Herein, a PEO‐based composite solid electrolyte with excellent anode and cathode interfacial compatibility is designed via the coordination modulation strategy induced by lithium difluorobis(oxalato)phosphate (DFBOP). By utilizing this electrolyte, the robust inorganic‐rich interphase involving LiF, LixPOyFz, and P─O components is in situ generated on lithium (Li) anode and LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode surfaces via forceful coordination among PEO, lithium bis(trifluoromethanesulphonyl)imide, and DFBOP and subsequent adjustment of front orbital energy levels. It contributes to homogeneous lithium deposition and an effective impediment of PEO oxidation decomposition at high voltage, promoting superior interfacial stability. Consequently, Li‐symmetric cells with modified electrolyte can achieve a stable cycle over 7000 h at 0.2 mA cm−2. Specially, the cathode electrolyte interphase with a unique organic–inorganic interpenetration network structure enables the 4.5 V Li/NCM811 cells to cycle steadily over 100 cycles, with a high discharge capacity of 215.4 mAh g−1 and initial coulombic efficiency of 91.23%. This research has shed light on the interfacial design of PEO‐based electrolytes from the perspective of electrolyte coordination regulation to construct high‐performance SSLMBs.

(Oxalato)borate: The key ingredient for polyethylene oxide based composite electrolyte to achieve ultra-stable performance of high voltage solid-state LiNi0.8Co0.1Mn0.1O2/lithium metal battery

Enabling Stable Cycling of 4.2 V High‐Voltage All‐Solid‐State Batteries with PEO‐Based Solid Electrolyte

Tailoring Stable PEO‐Based Electrolyte/Electrodes Interfaces via Molecular Coordination Regulating Enables 4.5 V Solid‐State Lithium Metal Batteries

Asymmetric organic-inorganic bi-functional composite solid-state electrolyte for long stable cycling of high-voltage lithium battery

An Ultra-Thin Polymer Electrolyte for 4.5 V High Voltage LiCoO2 Quasi-Solid-state Battery

A Dual-Salt Peo-Based Polymer Electrolyte with Cross-Linked Polymer Network for High-Voltage Lithium Metal Batteries

Electrochemical stability of lithium bis(oxatlato) borate containing solid polymer electrolyte for lithium ion batteries

Stable Interface Chemistry and Multiple Ion Transport of Composite Electrolyte Contribute to Ultra‐long Cycling Solid‐State LiNi0.8Co0.1Mn0.1O2/Lithium Metal Batteries

Enhancing high-voltage solid-state lithium-metal battery performance through a stable solid-electrolyte interphase

Dual-Salt-Containing Polymer Interlayer Stabilizes Solid-State Li-Metal Batteries with LiCoO 2 Cathodes

Colloid Electrolyte Containing Li3P Nanoparticles for Highly Stable 4.7 V Lithium Metal Batteries

Enabling All‐Solid‐State Li Metal Batteries Operated at 30 °C by Molecular Regulation of Polymer Electrolyte

Stabilizing Polyether Electrolyte with 4 V Metal Oxide Cathode by Nanoscale Interfacial Coating.

PEO based polymer in plastic crystal electrolytes for room temperature high-voltage lithium metal batteries

Stable Interface Chemistry and Multiple Ion Transport of Composite Electrolyte Contribute to Ultra‐long Cycling Solid‐State LiNi <sub>0.8</sub> Co <sub>0.1</sub> Mn <sub>0.1</sub> O <sub>2</sub> /Lithium Metal Batteries

Realizing Compatibility of High Voltage Cathode and Poly (ethylene Oxide) Electrolyte in All-Solid-state Lithium Batteries by Bilayer Electrolyte Design

In-situ electrochemical passivation for constructing high-voltage PEO-based solid-state lithium battery

Dual‐Polymer‐Electrolytes: High Voltage Stable Polyoxalate Catholyte with Cathode Coating for All‐Solid‐State Li‐Metal/NMC622 Batteries (Adv. Energy Mater. 42/2020)

In-situ polymerization of 1,3-dioxane as highly compatible polymer electrolytes to enable 4.5 V Li-metal batteries

Improving interfacial stability by in situ protective layer formation in 4.2V poly(ethylene oxide) based solid state lithium batteries

Stabilizing and understanding the interface between nickel-rich cathode and PEO-based electrolyte by lithium niobium oxide coating for high-performance all-solid-state batteries