Abstract:All-solid-state lithium batteries (ASSLBs) combining ultrahigh nickel cathodes have received considerable attention due to their great potential for ensuring safety along with high energy density. Improving the interfacial stability between the cathode and solid electrolyte is crucial for achieving high battery performance. Herein, we first employed in situ electrochemical impedance spectroscopy, galvanostatic cycling, and ex situ time-of-flight secondary ion mass spectrometry techniques to probe the degradation mechanism of the ultrahigh nickel cathode, LiNi0.92Co0.05Mn0.03O2, and amorphous Li2TaCl7 electrolyte at different cut-off voltages of 4.3, 4.6, and 4.8 V. At high charge potentials, LiNi0.92Co0.05Mn0.03O2 cathodes release lattice oxygen, causing the inevitable breakdown of amorphous chlorides and the Li-ion percolating network within the composite cathodes, resulting in a decrease in the capacity and lifespan of the fabricated ASSLBs. In light of these findings, we propose a capacity-cyclability trade-off strategy by reducing the charging voltage, resulting in a durable interface that prevents the generation of lattice oxygen. Specifically, the capacity retention of ASSLBs operating under a high areal capacity of 5 mA h cm-2 remained above 80% for 300 and 600 cycles at 1 and 3 mA cm-2, respectively. Additionally, the lifespan increased sixfold compared to the 4.3 V charging conditions. Our work elucidates the degradation mechanisms of ultrahigh nickel cathodes and amorphous chloride electrolytes and presents a practical strategy for achieving cycling durability of battery. Highly active lattice oxygen released from ultrahigh nickel cathodes degrade chloride solid electrolytes, forming an inert interphase; this phenomenon worsens at higher voltages. Reducing the cut-off voltage markedly enhances ASSLBs' operational lifespan.

Insights Into the Interfacial Degradation of High-Voltage All-Solid-State Lithium Batteries

Enabling Stable Cycling of 4.2 V High‐Voltage All‐Solid‐State Batteries with PEO‐Based Solid Electrolyte

The interphasial degradation of 4.2 V-class poly(ethylene oxide)-based solid batteries beyond electrochemical voltage limit

Improving interfacial stability by in situ protective layer formation in 4.2V poly(ethylene oxide) based solid state lithium batteries

An Ultra-Thin Polymer Electrolyte for 4.5 V High Voltage LiCoO2 Quasi-Solid-state Battery

In-situ Modification of Ultrathin and Uniform Layer on LiCoO2 Particles for 4.2 V Poly(ethylene Oxide) Based Solid-State Lithium Batteries with Excellent Cycle Performance

Interfacial Engineering for Stabilizing Polymer Electrolytes with 4V Cathodes in Lithium Metal Batteries at Elevated Temperature

Ionic-liquid-containing Polymer Interlayer Modified PEO-based Electrolyte for Stable High-Voltage Solid-State Lithium Metal Battery

Realizing Compatibility of High Voltage Cathode and Poly (ethylene Oxide) Electrolyte in All-Solid-state Lithium Batteries by Bilayer Electrolyte Design

Dual-Salt-Containing Polymer Interlayer Stabilizes Solid-State Li-Metal Batteries with LiCoO 2 Cathodes

Constructing Nano‐Interlayer Inhibiting Interfacial Degradation toward High‐Voltage PEO‐Based All‐Solid‐State Lithium Batteries

4.2 V polymer all-solid-state lithium batteries enabled by high-concentration PEO solid electrolytes

Unraveling Interfacial Compatibility of Ultrahigh Nickel Cathode and Chloride Solid Electrolyte for Stable All-Solid-state Lithium Battery

Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries

Deciphering Chemical/Electrochemical Compatibility of Li3InCl6 in 5.2 V High-Voltage LiCoO2 All-Solid-State Batteries

High voltage stable cycling of all-solid-state lithium metal batteries enabled by top-down direct fluorinated poly (ethylene oxide)-based electrolytes

Constructing Interfacial Nanolayer Stabilizes 4.3 V High‐Voltage All‐Solid‐State Lithium Batteries with PEO‐Based Solid‐State Electrolyte

Unraveling the LiNbO3 Coating Layer on Battery Performances of Lithium Argyrodite-Based All-Solid-state Batteries under Different Cut-off Voltages

Synergy of PVDF-HFP and ZIF-8 Promotes PEO Electrolyte Towards All-solid-state Lithium Battery

Lithium difluorophosphate–modified PEO-based solid-state electrolyte for high-voltage lithium batteries

Layered Polymer Stacking for Stable Interfaces and Dendrite Growth Inhibition in All-Solid-State Lithium Batteries.