Abstract:This work presents a numerical and experimental investigation on the heat transfer and turbulent flow of cooling steam in a rectangular duct with 90° ribs and studies the effect of cooling conditions on the heat transfer augmentation of steam. In the calculation, the variation range of Reynolds is from 10,000 to 190,000, the inlet temperature varies from 300°C to 500°C and the outlet pressure is from 0.5MPa to 6MPa. The aforementioned wide ranges of flow parameters cover the actual operating condition of coolant used in the gas turbine blades. The computations are carried with four turbulence models (the standard k-ɛ , the renormalized group (RNG) k-ɛ , the Launder-Reece-Rodi (LRR) and the Speziale-Sarkar-Gatski (SSG) turbulence models). The comparison of numerical and experimental results reveals that the SSG turbulence model is suitable for steam flow in the ribbed duct. Therefore, adopting the conjugate calculation technique, further study on the steam heat transfer and flow characteristics is performed with SSG turbulence model. The results show that the variation of cooling condition strongly impacts the forced convection heat transfer of steam in the ribbed duct. The cooling supply condition of a relative low temperature and medium pressure could bring a considerable advantage on steam thermal enhancement. In addition, comparing the heat transfer level between steam flow and air flow, the performance advantage of using steam is also influenced by the cooling supply condition. Changing Reynolds number has little effect on the performance superiority of steam cooling. Increasing pressure would strengthen the advantage, but increasing temperature gives an opposite result.

Turbulent convection of air-cooled rectangular duct with surface-mounted cross-ribs

Forced Convective Heat Transfer and Pressure Drop of Air Flowing in a Rectangle Duct with Cross-Ribs on the Opposite Walls

Experimental Study on Forced Convection Hydraulic and Thermal Characteristics in a Dimpled Flat Duct

Experimental Study of Forced Convection in a Rectangle Duc twith Cross-Ribs on the Opposite Walls

Experimental Study of Developing Turbulent Flow and Heat Transfer in Ribbed Convergent/divergent Square Ducts

Heat Transfer and Flow Structure in a Detached Latticework Duct

Experimental and Numerical Investigation of Convection Heat Transfer in a Rectangular Channel with Angled Ribs

An experimental and numerical study of laminar natural convection along vertical rib-roughened surfaces

Experimental Investigation of Mixed Convection in A Rectangular Duct with A Heated Plate in the Middle of Cross Section

Experimental and Numerical Study of Developing Turbulent Flow and Heat Transfer in Convergent/divergent Square Ducts

An experimental study of pressure drop and friction factor for laminar and transition opposing mixed convection in entrance region of rectangular duct

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Experimental and Numerical Study of Turbulent Heat Transfer in Twisted Square Ducts

Effect of Duct Aspect Ratio on Heat Transfer and Friction in Steam-Cooled Ducts with 60° Angled Rib Turbulators

Numerical Simulation of Manipulated Flow and Heat Transfer over Surface-Mounted Rib

The Effect of Cooling Conditions on Convective Heat Transfer and Flow in a Steam-Cooled Ribbed Duct

Direct numerical simulation of turbulent duct flow with inclined or V-shaped ribs mounted on one wall

Finite element analysis of laminar convective heat transfer in vertical ducts with arbitrary cross-sections

Direct Numerical Simulation of Turbulent Flow and Heat Transfer in a Square Duct with Natural Convection

Heat transfer and thermal–hydraulic evaluations of cross-circular grooved rectangular flow ducts depending on rectangular baffle design parameters

Heat transfer and flow structure in a rotating duct with detached pin fins