Abstract:The work reported in this paper is a systematic experimental and numerical study of friction and heat transfer characteristics of divergent/convergent square ducts with an inclination angle of 1 ∘ in the two direction at cross section. The ratio of duct length to average hydraulic diameter is 10. For the comparison purpose, measurement and simulation are also conducted for a square duct with constant cross section area, which equals to the average cross section area of the convergent/divergent duct. In the numerical simulation the flow is modeled as being three-dimensional and fully elliptic by using the body-fitted finite volume method and the k ɛ turbulence model. The uniform heat flux boundary condition is specified to simulate the electrical heating used in the experiments. The heat transfer performance of the divergent/convergent ducts is compared with the duct with uniform cross section under three constraints (identical mass flow rate, pumping power and pressure drop). The agreement of the experimental and numerical results is quite good except at the duct inlet. Results show that for the three ducts studied there is a weak secondary flow at the cross section, and the circumference distribution of the local heat transfer coefficient is not uniform, with an appreciable reduction in the four corner regions. In addition, the acceleration/deceleration caused by the cross section variation has a profound effect on the turbulent heat transfer: compared with the duct of constant cross section area, the divergent duct generally shows enhanced heat transfer behavior, while the convergent duct has an appreciable reduction in heat transfer performance.

Finite element analysis of laminar convective heat transfer in vertical ducts with arbitrary cross-sections

Simulation And Analysis On Heat Transfer In Laminar Oscillatory Flow In-Tube

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Numerical Analysis of Mixed Convective Heat Transfer In a Square Channel with Uniform Wall Temperature.

Developing Laminar Flow and Heat Transfer in Annular-Sector Ducts

Field Coordination Analysis Of Convection Beat Transter In Rectangular Ducts With Different Thermal Boundary Conditions

Fully Developed Heat Transfer to Fluid Flow in Rectangular Passages Filled With Porous Materials

Numerical Analysis of the Laminar Heat Transfer and Flow Situation Around a Square Rod Spacer in a Flow Passage.

Numerical Computation of Laminar Natural Convection Heat Transfer Around a Horizontal Compound Tube with External Longitudinal Fins

Experimental and Numerical Study of Developing Turbulent Flow and Heat Transfer in Convergent/divergent Square Ducts

Numerical Investigation of Thermally Developing Non-Darcy Forced Convection in a Porous Circular Duct with Asymmetric Entrance Temperature under LTNE Condition

Entrance and Temperature Dependent Viscosity Effects on Laminar Forced Convection in Straight Ducts With Uniform Wall Heat Flux

Numerical investigation of laminar natural convective heat transfer from a horizontal triangular cylinder to its concentric cylindrical enclosure

Laminar Heat Transfer Inside Concentric Annular Duct in Entrance Region and Effects of Variable Fluid Properties

Numerical Simulation on Turbulent Flow and Heat Transfer of the Square Cross-Section Helical Duct

Three Dimensional Finite Element Analysis for Rayleight-Benard Convection in Rectangular Enclosures

Nummerical Simulation Of Heat Transfer Of Air Across Finned Tube-Banks

A Formulation of Combined Forced and Free Convection Past Horizontal and Vertical Surfaces

Turbulent convection of air-cooled rectangular duct with surface-mounted cross-ribs

FIELD COORDINATION ANALYSIS OF CONVECTIVE HEAT TRANSFER IN THERMAL ENTRANCE REGION IN RECTANGULAR DUCTS WITH ONE SIDE HEATED

A Numerical Solution of Laminar Forced Convection in a Heated Pipe Subjected to a Reciprocating Flow