Abstract:Cracking in fibrous composites is inevitable, and the fracture pattern is influenced by its fiber distribution. Bamboo fibrous composites have a distinct fiber distribution, which makes them an excellent material for studng the relationship between fiber distribution and fracture mode. Glued laminated bamboo is a bi-directional bamboo fibrous composite, which is called glubam for short. Its vertical thickness is about 28 mm, and the ratio of the number of longitudinal fiber layers to the number of transverse fiber layers is 4:1. This study conducted three-point bending fracture tests on single-edge notched specimens of glubam to investigate its mode-I fracture characteristics in the transverse vertical direction. The deformation curves show that the specimens still have the load-carrying capacity after reaching the maximum load, and the load shows a trend of step-like decrease, exhibiting a quasi-ductile fracture behavior. Overall, the fracture process can be divided into four stages, including linear, softening, quasi-ductile, and failure stages. In this study, based on certain assumptions, the prefabricated notch length a0 was adjusted according to the position of the transverse fibers. Subsequently, the non-linear elastic fracture mechanics method was employed to calculate the fracture parameters of glubam during the softening and quasi-ductile stages, including the fracture toughness KIC* and fiber tensile strength ft. The deviation of the fracture parameters between the two stages is within 10%, indicating that the correction of the a0 is correct. This indirectly proves that the staggered structure formed by longitudinal and transverse fibers is responsible for the quasi-toughness fracture of glubam. Finally, this study summarized and analyzed the quasi-ductile fracture behavior and found that materials or structures exhibiting quasi-ductile fracture behavior often possess a staggered structure. This staggered structure makes the crack in the form of semi-stable propagation, while the load decreases in a step-like manner.

Tangential Fracture Toughness of Bamboo

Mode I Fracture Toughness of Tangential Moso Bamboo

Research on Moso Bamboo Radical Fracture Toughness

In Situ Detection of the Fracture Behaviour of Moso Bamboo (phyllostachys Pubescens) by Scanning Electron Microscopy

Tensile Behaviour and Fracture Mechanism of Moso Bamboo (phyllostachys Pubescens)

Real-time flexural fracture behaviors and toughening mechanisms of bamboo slivers with different fiber content and moisture content

In Situ Observation of Fracture Behavior of Bamboo Culm

Monotonic and cyclic tests of round bamboo shear walls

Crack Propagation And Fracture Process Zone (Fpz) Of Wood In The Longitudinal Direction Determined Using Digital Image Correlation (Dic) Technique

Impact Toughness and Quasi-Static Bending Strength of Glubam

Experimental study on mechanical behavior of glue laminated bamboo Ⅰ-joists

The study on in situ asymmetric bending behavior of structural bamboo materials under combined tension-bending loads

Bamboo as a substitute for plastic: Underlying mechanisms of flexible deformation and flexural toughness of bamboo at multiple scales

Study on the Quasi-Ductile Fracture Behavior of Glubam: The Role of Fiber Distribution

Tensile Performance of Moso Bamboo Inner Strips

Mode I fracture toughness properties of Plectocomia kerrana Becc (rattan) cane

Effect of crack size, thickness and span on the transverse mode I fracture characteristics of laminated flattened-bamboo lumber

Experimental Study on Uniaxial Compression of Bamboo Poles with Different Reinforcements

Compressive Failure Mechanism of Structural Bamboo Scrimber

Experimental Study on Uniaxial Compression of Bamboo Nodes Using 3D Scanning Technique

Experimental study on bending mechanical properties of moso bamboo