Abstract:Bamboo is an appealing source of engineering materials due to its renewability and sustainability. However, the traditional method of processing bamboo splits using four-side planing leads to a very low utilization rate of bamboo materials. Additionally, the non-uniform structure of the bamboo culm wall results in a concentration of higher density towards the outer part and a gradual decrease towards the inner part. To address these issues, this study proposes an effective and environmentally friendly method that combines flattening and densification to modify the heterogenous structure and enhance the properties of natural bamboo. Natural bamboo splits with a moisture content of 70 % were compressed by 44 % along the radial direction of culm wall for 20 min at temperatures of 170 °C and 190 °C, respectively. The gradient characteristics of modified bamboo including microstructure, density, and mechanical properties were investigated for the first time to explore the effect of flattening and densification on the heterogenous bamboo material. After modification, the parenchyma tissues were collapsed, the fiber bundle fraction increased, and the differences in lumen size and fiber fraction between the outer and the inner parts of bamboo splits decreased. The density of the inner part of bamboo splits was tremendously increased to over 1.0 g/cm 3 and was consistent with that of the outer part. The tensile and bending properties across the gradient were significantly improved, and the weaker section was reinforced and possessed a strength equivalent to the sturdy part of natural bamboo. Furthermore, the tensile and bending properties of full-thickness bamboo splits were improved, and the change in stress distribution led to a stable structure replacing the previously vulnerable structure.

Tensile Performance of Moso Bamboo Inner Strips

Tensile Properties of Moso Bamboo Vascular Bundles

Effects of Anisotropy and Radial Gradient Variation on Tensile Shear Strength of Moso Bamboo

Shear Failure Characteristics and Stress-Strain Relationship of Moso Bamboo Parallel to the Fibers

Impact Toughness and Quasi-Static Bending Strength of Glubam

A novel method for measuring mechanical properties of vascular bundles in moso bamboo

Tensile Behaviour and Fracture Mechanism of Moso Bamboo (phyllostachys Pubescens)

Effect of Fiber on Tensile Properties of Moso Bamboo

Mode I Fracture Toughness of Tangential Moso Bamboo

Experimental Research on Mechanical Performance Parallel to Grain of Bamboo Nanmu

The Mechanical Properties of Bamboo and Vascular Bundles

Experimental Investigations on the Mechanical Properties of Bamboo Fiber and Fibril

Evaluation and Grading of Bending Properties Moso Bamboo Strips Near the Bamboo Green

Tangential Fracture Toughness of Bamboo

A Study of the Mechanical Properties and Abrasive Wear Properties of Bamboo

Experimental study on bending mechanical properties of moso bamboo

The structure and mechanics of Moso bamboo material

The Effect of Bamboo Water Content on The Tensile Strength of Bamboo

Real-time flexural fracture behaviors and toughening mechanisms of bamboo slivers with different fiber content and moisture content

Experimental Study of the Fracture Behavior of Bamboo Under Tension Based on Digital Speckle Correlation Method

Effects of integrated process of flattening and densification on the gradient structure and properties of Moso Bamboo