Abstract:Introducing nanotwins with extremely fine twin boundary spacing (TBSs ≤ 10 nm) in metals with high stacking fault energy (SFE) has posed a long-standing challenge, hindering an in-depth understanding of their strengthening mechanisms. Here, we synthesized a series of columnar-grained nanotwinned structures with extremely fine TBSs in Ni and Ni alloys with high SFEs, and systematically investigated their mechanical responses under various loading directions relative to the coherent twin boundaries (CTBs). Under the loading directions of 90° and 0°, contrary to the softening effect observed in nanotwinned metals with equiaxed grains, continuous strengthening was found to extend to the finest TBS of 1.9 nm in the columnar-grained nanotwinned Ni and Ni alloy. This resulted in an ultra-high strength of 4.3 and 3.8 GPa, respectively. Combined experimental and simulational studies were employed to investigate the mechanism for continuous strengthening. As the TBS decreased to a critical value (3-5 nm), the strengthening mechanism was revealed to transform from CTB obstructing dislocations to the dislocation starvation-dominated mechanism, which led to a shift in deformation behavior from homogeneous to localized plasticity. Distinct from the detwinning-induced softening effect, the dislocation-starvation mechanism resulted in continuous strengthening, with the yield strength following a power-law function concerning TBS. Additionally, our results illustrate that nanotwins deformed via significant detwinning at the loading direction of 45°, leading to strengthening that primarily depends mainly on the column width rather than TBS.

Twin Boundaries: Strong or Weak?

A review on the fatigue cracking of twin boundaries: Crystallographic orientation and stacking fault energy

Effects of Tensile/compressive Overloads on Fatigue Crack Growth Behavior of an Extra-Low-interstitial Titanium Alloy

Twin boundary migration and reactions with stacking fault tetrahedron in Cu and CoCrCuFeNi high-entropy alloy

Effect of grain size on fatigue cracking at twin boundaries in a CoCrFeMnNi high-entropy alloy

Cracking in a Fe–25Mn–3Si–3Al Steel

Strain localization and fatigue cracking behaviors of Cu bicrystal with an inclined twin boundary

Dislocation mechanisms in strengthening and softening of nanotwinned materials

Effect of surface high-density twinned structure on the fatigue crack initiation of Ti-6Al-4V

Stabilizing defective coherent twin boundaries for strong and stable nanocrystalline nanotwinned Cu

High stress twinning in a compositionally complex steel of very high stacking fault energy

Effect of Twin Boundary Density on Mechanical Behavior of Al0.1CoCrFeNi High-Entropy Alloy by Molecular Dynamics Simulation

Twinning and Sequential Kinking in Lamellar Ti-6Al-4V Alloy

Fatigue crack propagation anisotropy of an Al–Zn–Mg–Cu super-thick plate

Influence of grain structure and precipitates on fatigue crack propagation behaviors of Al- x Cu-1.2Li-X alloys

Effect of twin boundaries on the strength of body-centered cubic tungsten nanowires

On high‐cycle fatigue anisotropy of an aluminum alloy super‐thick plate

Fatigue inhomogeneity of 140 mm thick TC4 titanium alloy double-sided electron beam welded joints

Anisotropic Mechanical Properties and Deformation Mechanisms of Nanotwinned Ni and Ni Alloys With Extremely Fine Twin Boundary Spacings

Hierarchical twinning governed by defective twin boundary in metallic materials

Effects of SMAT Temperature and Stacking Fault Energy on the Mechanical Properties and Microstructure Evolution of Cu-Al-Zn Alloys