Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Experimental Research on Dynamic Buckling of the Cylindrical Shell Subjected Axial Impact and the Analysis of the Stress Wave Effect

Experimental investigation and computer simulation on dynamic buckling behavior of liquid-filled cylindrical shells under axial impact

Dynamic response of cylindrical shell supporting structure under multiple impacts: experimental and numerical investigation

Elastic-plastic dynamic stability analysis of single layer spherical latticed shells considering damage accumulation effect

Impact Experiment and Buckling Criterion Analysis of Thin-Walled Cylindrical Shells

Investigation on Plastic Instability of a Thin-Walled Anisotropic Cylindrical Shell Subjected to Internal Impulsive Loading

Experiment Research on Axial Dynamic Buckling of Thin-Wall Cylindrical Shells Based on Finite Element Model

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Experimental and Numerical Study on the Dynamic Buckling of Ping-pong Balls under Impact Loading

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Dynamic Buckling of a Cylindrical Shell with a General Boundary Condition under an Axial Impact

Effect of Welding Residual Stress on Plastic Buckling of Axially Compressed Cylindrical Shells with Patterned Welds

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

Buckling of step cylindrical shells under axial impact load

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Effect of Post-Weld Heat Treatment on the Plastic Buckling of Welded Cylindrical Shells

Effect of Weld Reinforcement on Axial Plastic Buckling of Welded Steel Cylindrical Shells