Abstract:Owing to its capacity to synthesize high molecular weight of Poly Lactic Acid (PLA), polymerization via Ring Opening Polymerization (ROP) has gotten the attention of researchers. Accordingly, since the ROP technique utilizes lactide as a potential monomer for PLA synthesis, the production of lactide is indispensable. Currently, in order to solve the problem associated with commonly used homogeneous tin-based catalyst, looking for alternative catalysts for lactide synthesis are becoming more attractive. In the present study, the optimum reaction conditions for lactide synthesis via thermal catalytic depolymerization by using ZnO nanoparticle dispersion were investigated. The effects of three major factors including reaction temperature (190 °C, 210 °C, and 230 °C), reaction time (1 h, 2 h, and 10 h), and catalyst concentration (0.3%w/w, 0.65%w/w, 1.0%w/w) on the yield of lactide were studied. The oligomer PLA was produced from an aqueous solution of Lactic acid (50 mL, 88%) via polycondensation reaction at 150 °C for 4 h. The suspension of Zno Nps was prepared by dissolving Zno Nps powder in distilled water with a ratio of 1:4. The produced oligomer of PLA was depolymerized via thermal catalytic depolymerization using 20% w/w of the prepared Zno NPs dispersion. The optimization of lactide yield and depolymerization reaction parameters was done via response surface methodology with a Box-Behnken design. Based on the analysis, the optimum conditions were found to be a reaction temperature of 215.73 °C, a reaction time of 7.32 h, and a catalyst concentration of 0.72%w/w along with the maximum lactide yield of 80.4%. Generally, the outcome of the study reveals that the utilization of ZnO nanoparticle dispersions as a catalyst for lactide synthesis from oligomer PLA via thermal catalytic depolymerization is worthful

Study on synthesis of lactide with sodium lactate as catalyzer

Melt Polycondensation of L‐lactic Acid Catalyzed by 1,3‐dialkylimidazolium Ionic Liquids

Design of a Heterogeneous Catalytic Process for the Continuous and Direct Synthesis of Lactide from Lactic Acid

Synthesis of Poly(l-Lactic Acid) with Improved Thermal Stability by Sulfonic Acid-Catalyzed Melt/solid Polycondensation

Preparation of Lactide Using Ionic Liquid Catalyst

Efficient Synthesis of Lactide with Low Racemization Catalyzed by Sodium Bicarbonate and Zinc Lactate

Lactide synthesis via thermal catalytic depolymerization of poly lactic acid oligomer using ZnO nanoparticle dispersion

Ring-opening Polymerization of L-Lactide Catalyzed by a Novel Molybdenum-Based Catalytic System

Controlled Synthesis of L-Lactide Using Sn-Beta Zeolite Catalysts in a One-Step Route

Direct Synthesis of Lactide from Concentrated Lactic Acid Catalyzed by Hierarchical Sn-beta Zeolite

Polyaniline-Supported Zinc Oxide Nanocomposite-Catalyzed Condensation of Lactic Acid to Lactide with High Yield and Optical Purity

Guaiacolate Derivatives‐Containing Sodium Complexes as Catalysts for L‐Lactide Polymerization

Study on zinc oxide‐creatinine hybrid catalyst for efficient lactide synthesis with low racemization

Preparation of L-Lactide with High Optical Purity Via the Zinc-Doped Polypyrrole-Catalyzed Lactic Acid Condensation

A response surface methodology for the use of MIL‐101 as a catalyst for the one‐step synthesis of lactide

PREPARATION AND RING-OPENING POLYMERIZATION IN XYLENE SOLUTION OF D,L-LACTIDE

Synthesis of Polylactide with Low-toxic Zinc Catalysts

Synthesis of L-Lactide from Lactic Acid and Production of PLA Pellets: Full-Cycle Laboratory-Scale Technology

Synthesis and Modeling of Poly(L-lactic acid) via Polycondensation of L-Lactic Acid

Impact of aromatic sulfonate derivative on the crystallization, thermal resistance, and hydrolytic properties of poly(lactic acid)

Lactonization of Diols Over Highly Efficient Metal‐Based Catalysts