Abstract:Micrometer-sized monodispersed mesoporous silica spheres with adjustable particle diameter and adjustable pore structure were successfully prepared. Drops of a silica sol were injected by a microfluidic device into a heated oil bath where the droplets solidified during sedimentation. Drop size was varied by control of the rates of the oil flow past the silica sol injector. The silica sol was made by prehydrolysis of tetraethyl orthosilicate (TEOS) in an aqueous acidic solution using a triblock copolymer as the template. Acrylamide monomer was added in the sol after prehydrolysis to accelerate the solidification rate of drops in the oil bath. The amount of monomer was used to control the pore sizes in the silica particles. The effect of synthesis conditions on the morphology and pore structure of spheres was investigated. Silica spheres with different surface morphology and internal structure were obtained by changing the composition of sedimentation medium. Pore diameter and pore-size distribution can be adjusted effectively by controlling the concentration of silica source, acid or polymeric monomer in the aqueous phase. The prepared silica spheres have high-surface area (>550 m(2)/g), large pore volume (>1.1 cm(3)/g) and large amount of macropores. High-protein adsorption capacity (520 mg/g) was achieved in the adsorption experiments of bovine serum albumin (BSA). Pore structure of silica spheres was demonstrated to be a crucial factor to determine the protein adsorption capacity. (C) 2007 American Institute of Chemical Engineers.

A new ‘pH-induced rapid colloid aggregation’ method to prepare micrometer-sized spheres of mesostructured silica in water-in-oil emulsion

Synthesis of micrometer-sized hard silica spheres with uniform mesopore size and textural pores

Preparation of Porous Silica Spheres with Self-Dispersing Properties

Synthesis of mesoporous silica hollow spheres in supercritical CO2/water systems

Direct Preparation of Silica Hollow Spheres in a Water in Oil Emulsion System: the Effect of Ph and Viscosity

Preparation of hollow silica microspheres in W/O emulsions with polymers

Facile Synthesis Of Monodisperse Microspheres And Gigantic Hollow Shells Of Mesoporous Silica In Mixed Water-Ethanol Solvents

Micrometer‐sized Monodispersed Silica Spheres with Advanced Adsorption Properties

Preparation of silica microspheres with bimodal pore structure in micro-channel

Synthesis of Ordered Mesoporous Silica Spheres with Controllable Diameter in Micrometer

Size-Controllable Synthesis of Worm-Like Sio2 Microspheres Using Dodecylamine As Direct Agent in Ethanol/Water Solvent System

Preparation of hollow mesoporous silica spheres by a sol–gel/emulsion approach

Formation Mechanism and Size Control in One-Pot Synthesis of Mercapto-Silica Colloidal Spheres

Fabrication of mesoporous silica hollow spheres using triblock copolymer PEG–PPG–PEG as template

Morphology controlling of micrometer-sized mesoporous silica spheres assisted by polymers of polyethylene glycol and methyl cellulose

Preparation of Monodispersed Uniform Silica Spheres with Large Pore Size for Fast Adsorption of Proteins

Synthesis of Colloidal Mesoporous Silica Spheres with Large Through-Holes on the Shell

Synthesis and characterization of high-surface-area millimeter-sized silica beads with hierarchical multi-modal pore structure by the addition of agar

Synthesis of uniform-size hollow silica microspheres through interfacial polymerization in monodisperse water-in-oil droplets

Polymeric Surfactant (PIBSA-X) Facilitates the Formation of a Water-in-Oil Emulsion Reactor for the Preparation of Ultrasmall Nanosilica

Preparation of Micrometer-Sized Mesoporous Silica Spheres Assisted by Methyl Cellulose