Abstract:Magnesium aluminate spinel (MgAl2O4) ceramics are high-performance and carbon-free materials widely used in both military and civilian fields. However, it is usually challenging to densify during the solid-state sintering process. The excellent properties of some rare earth oxides have been proved to promote the densification of MgAl2O4 spinel ceramics. But the mechanism of promoting sintering is not clear. In the present work, MgAl2O4 spinel ceramics have been successfully fabricated by co-doping CeO2 and La2O3 via a single-stage solid-state reaction sintering. The effects of addition amounts of CeO2 and La2O3 on phase compositions, microstructures, sintering characteristics, cold compressive strength, and thermal shock resistance of as-prepared MgAl2O4 spinel ceramics were systematically investigated. The results show that by co-doping CeO2 and La2O3 can increase the defect concentration due to the lattice distortion. This could promote the movement of Al3+ and Mg2+ at high temperature, which is beneficial to the formation of more secondary MgAl2O4 spinel. t-ZrO2 with more Ce4+ filling between spinel grains could prevent the growth of grains and promote the densification, besides the new-formed LaAlO3 that was mainly distributed along the grain boundary of the MgAl2O4 phase, both of which were favorable for the formation of dense microstructure of MgAl2O4 spinel materials. At the same time, the formation of more secondary MgAl2O4 spinel and sintering densification also improve the mechanical properties of spinel ceramics. La3+ will segregate to the spinel grain boundary, preventing grain boundary movement and absorbing the main crack's fracture energy. With 3 wt% CeO2 and 3 wt% La2O3 co-doping, the bulk density of the sample increased from 3.02 g∙cm−3 to 3.55 g∙cm−3; the apparent porosity decreased from 12.21% to 9.97%; the cold compressive strength increased from 172.88 MPa to 189.54 MPa; and the residual strength retention ratio after thermal shock increased from 84.92% to 89.15%.

Erosion Resistance of Magnesia-alumina Spinel in Synthesis Process of Lithium Cobaltaoxide

Corrosion Behavior of Cobalt Oxide and Lithium Carbonate on Mullite-Cordierite Saggar Used for Lithium Battery Cathode Material Sintering

Preparation and properties of MgAl2O4 spinel ceramics by double-doped CeO2 and La2O3

Preparation and Corrosion Resistance of Β-Al2o3-mgal2o4 Multiphase Materials for Synthesising Li-ion Battery Cathode Materials

Effect of Y2O3 on the corrosion resistance of two-step sintered Al5Y3O12-MgAl2O4 sidewalls in the aluminum electrolyte

Synthesis and Characterization of Porous Magnesium Aluminate Spinel by Hydrothermal Process

Enhanced corrosion resistance by simultaneous refinement of pore structures and phase composition: A novel lightweight microporous alumina-rich spinel (Mg0.4Al2.4O4)

Self-Propagating High-Temperature Synthesis of Magnesium Aluminate Spinel Using Mg–Al Alloy

Phase Composition, Microstructure and Mechanical Properties of Aluminous Cements Containing Magnesium Aluminate Spinel

Molten Salt Synthesis of Magnesium Aluminate (mgal2o4) Spinel on Ti3alc2 Substrate

Synthesis of magnesium aluminate spinel by reaction sintering with different magnesia sources

Preparation and Characterization of Porous Mgal2o4 Spinel Ceramic Supports from Bauxite and Magnesite

A strategy for controlling microstructure and mechanical properties of microporous spinel (MgAl2O4) aggregates from magnesite and Al(OH)3

Dissolution mechanism of magnesium aluminate spinel in copper smelting slag based on the shrinking core reaction models of corrosion

Hydrolysis Process and Mechanism of Magnesium Aluminate Alkoxides

The microstructure evolution and performance enhancement of MgO-C refractories by the addition of MA90 spinel micro-powder

Effects of Sm2O3 addition on sintering behavior of pre-synthesized magnesia-rich magnesium aluminate spinel

Boosting the Electrochemical Performance of a Spinel Cathode with the In Situ Transformed Allogenic Li-Rich Layered Phase

Influence of Parameters of High-Energy Ball Milling on the Synthesis and Densification of Magnesium Aluminate Spinel

Enhancement of thermal shock resistance of Al2O3–MgAl2O4 composites by controlling the content and distribution of spinel phase

Mg(Al, Fe, Mn, REE)2O4 Spinel Prepared from Pelagic REE-Rich Clays and Application as Magnesium-Ion-Battery Cathodes