Abstract:Magnesium aluminate spinel (MgAl2O4) ceramics are high-performance and carbon-free materials widely used in both military and civilian fields. However, it is usually challenging to densify during the solid-state sintering process. The excellent properties of some rare earth oxides have been proved to promote the densification of MgAl2O4 spinel ceramics. But the mechanism of promoting sintering is not clear. In the present work, MgAl2O4 spinel ceramics have been successfully fabricated by co-doping CeO2 and La2O3 via a single-stage solid-state reaction sintering. The effects of addition amounts of CeO2 and La2O3 on phase compositions, microstructures, sintering characteristics, cold compressive strength, and thermal shock resistance of as-prepared MgAl2O4 spinel ceramics were systematically investigated. The results show that by co-doping CeO2 and La2O3 can increase the defect concentration due to the lattice distortion. This could promote the movement of Al3+ and Mg2+ at high temperature, which is beneficial to the formation of more secondary MgAl2O4 spinel. t-ZrO2 with more Ce4+ filling between spinel grains could prevent the growth of grains and promote the densification, besides the new-formed LaAlO3 that was mainly distributed along the grain boundary of the MgAl2O4 phase, both of which were favorable for the formation of dense microstructure of MgAl2O4 spinel materials. At the same time, the formation of more secondary MgAl2O4 spinel and sintering densification also improve the mechanical properties of spinel ceramics. La3+ will segregate to the spinel grain boundary, preventing grain boundary movement and absorbing the main crack's fracture energy. With 3 wt% CeO2 and 3 wt% La2O3 co-doping, the bulk density of the sample increased from 3.02 g∙cm−3 to 3.55 g∙cm−3; the apparent porosity decreased from 12.21% to 9.97%; the cold compressive strength increased from 172.88 MPa to 189.54 MPa; and the residual strength retention ratio after thermal shock increased from 84.92% to 89.15%.

Effects of Sm2O3 addition on sintering behavior of pre-synthesized magnesia-rich magnesium aluminate spinel

Effect of different MgO/Al2O3 ratios on microstructural densification, sintering process and mechanical property of MgAl2O4 materials

Fabrication of Y2O3-doped MgO Refractory Raw Materials Based on Magnesium Hydroxide from Salt-Lake Brine

Effect of Spinel Kinds on Properties of Alumina-Spinel Castables

The effect of MnO2 additive on the microstructure and mechanical properties of magnesium aluminate spinel

Sintering behavior and microstructure of (1-x)MgAl2O4-xMg2TiO4 spinel solid solutions prepared by isostructural heterogeneous nucleation

Effect of Magnesia-Alumina Spinel Precursor Sol on the Sintering Property of Fused Magnesia Refractory

Mechanism of in-situ formation of spinel and its effect on the mechanical properties of Al2O3–C refractories

Effects of different additives on properties of magnesium aluminate Spinel–Periclase castable

Effect of La2O3 addition on the microstructural evolution and thermomechanical property of sintered low-grade magnesite

Effect of Y2O3 and ZnO co-doping on the densification and properties of magnesium aluminum spinel

The microstructure evolution and performance enhancement of MgO-C refractories by the addition of MA90 spinel micro-powder

Preparation and properties of MgAl2O4 spinel ceramics by double-doped CeO2 and La2O3

Effect of Al2O3 + 4sio2 Additives on Sintering Behavior and Thermal Shock Resistance of MgO-Based Ceramics

Microstructural and Optical Properties of MgAl2O4 Spinel: Effects of Mechanical Activation, Y2O3 and Graphene Additions

Effects of different particle size of spinel and Y2O3 additive of the periclase-spinel refractory on the sintering densification and corrosion resistance to copper smelting slag

Effect of Al2O3 on Sintering and Thermal Shock Resistance of MgO Ceramic

Influence of in situ dysprosium aluminate garnet formation on sintering of reaction sintered magnesium aluminate spinel

A strategy for controlling microstructure and mechanical properties of microporous spinel (MgAl2O4) aggregates from magnesite and Al(OH)3

Microstructures and Strengths of Microporous MgO‐Al2O3 Refractory Aggregates Using Two Types of Magnesite

Investigation on mechanical and thermal properties of MgAl2O4-Mg2TiO4 solid solutions with spinel-type structure