Abstract:NiPtAl coatings are widely used as overlaying coatings besides bondcoats for thermal barrier coating (TBC) systems within high temperature environment. Oxidaiton behavior of NiPtAl coatings is mainly contribution for the failure of TBC systems or overlaying coatings. An initial oxide layer growth characteristics play a key role in extending lifetime of TBC system or overlaying coatings. In this work, the oxidation experiments of the Pt modified aluminide coating on CMSX-4 Ni-based alloy were carried out at 1150 degrees C for 1 h in 80% Ar+20%O-2. The microstructures of oxide on the NiPtAl coatings are studied by OM, SEM, TEM and Raman spectroscopy. The results indicated that the oxide layer on the NiPtAl coatings included stable and met-stable Al2O3 after 1 h oxidation, and part of spalled oxide layer as well as pores within the oxide layer. The 0.5 mu m thickness whisker-like theta-Al2O3 could form on NiPtAl coating during the initially oxidation stage. At the initial oxidation stage theta-Al2O3 fastly grew which resulted beta-NiAl to gamma'-Ni3Al transformation. The Pt particles formed on the inter-surface between alpha-Al2O3 and theta-Al2O3 layer due to a less Pt solid solubility in gamma'-Ni3Al compared to beta-NiAl in the coating. Fast growth of initial Al2O3 could induce pores formation within the alumina layer. The pores and stress due to oxidation and phase transformation could decrease the alumina adherence, and at last result in the oxide spallation.

Preparation, thermal stability and sintering behavior of Ni/Al2O3 coated powders

Preparation, sintering behavior and microstructure of Al2O3-Coated Ni powders

Preparation of NiAl2O4/Al2O3 composite nanopowder

Effect of nickel content on the sintering behavior, mechanical and dielectric properties of Al2O3/Ni composites from coated powders

The Preparation and Properties of Ni2Al3 Intermetallic Compound Coating

Influence of Nickle Coated on Alumina Nano-powder on Wetting Behavior of Alumina Ceramics with Aluminum

Microstructure of Ni–Al Powder and Ni–Al Composite Coatings Prepared by Twin-Wire Arc Spraying

Aluminide Coating Prepared on Ni-Base Superalloy by Pack Cementation

Preparation and properties of Al2O3/Ni composite from NiAl2O4 spinel by in situ reaction sintering method

Microstructure of Nanometer-sized Al2O3 Composite Coating Prepared by Electroless Plating

Preparation, sintering behavior, and microstructural studies of Al2O3/Mo composites from boehmite-coated Mo powders

Effects of Ni-5 wt% Al/Bi2O3 addition and heat treatment on mechanical and tribological properties of atmospheric plasma sprayed Al2O3 coating

High Temperature Oxidation Behavior of Cold Sprayed Ni-Al2O3 Composite Coating

Preparation and Characterization of Sol–gel Al2O3/Ni–P Composite Coatings on Carbon Steel

Microstructure, Mechanical Properties and High Temperature Tribological Behavior of NiAl-based Composites

Preparation and Tensile Properties of Al2O3/Ni-Co Nanocomposites

Characterization of Ni coating layer of Al2O3 particles and their wettability behavior in Al2O3@Ni/Al-10Si composites

Preparation and sintering behaviour of nanostructured alumina/titania composite powders modified with nano-dopants

Microstructure Analysis of Initial Alumina of Pt-Modified Aluminide Coatings on Ni-Based Alloy

Preparation and Moderate Temperature Oxidation Behavior of Ti- and Al-doped NbSi2-Si3N4 Composite Coatings on Nb Alloy

Preparation and Electromagnetic Properties of Al 2 O 3 /Ni Composites