Abstract:In the present paper, the NiAl based composite strengthened by TiC and ZrO2 ceramic particles (NiAl-TiC-ZrO2 for short) was prepared by the hot press aiding exothermic synthesis (HPES) technique to get a material with good wear properties. OM, SEM and TEM were employed to investigate the microstructure of the NiAl-TiC-ZrO2 composite. The mechanical properties and wear behaviour were studied by compression and dry sliding wear tests. The results showed that the NiAl-TiC-ZrO2 composite possesses fine microstructure, but the TiC and ZrO2 particles tended to agglomerate along NiAl phase boundary. Further observations revealed that the ultrafine ZrO2 particles contained stacking faults and microtwins inside and thin amorphous layer was generated along some interfaces of NiAl and TiC phases. Compression tests exhibited that the addition of TiC and ZrO2 particles could increase the strength of the NiAl-TiC-ZrO2 composite significantly. Wear tests results demonstrated that the NiAl-TiC-ZrO2 composite had relative good wear resistance at high temperature. Especially at 973 and 1073 K, the composite exhibited selflubrication behaviour, which might be attributed to the lubricant film formed on the worn surface. TEM observation on the lubricant film revealed that it was composed of amorphous matrix and nanoparticles. Moreover, TEM observation found the composite near the worn surface contained ultrafine microstructure. When the temperature increased or decreased, the lubricant film would be spalled partly, which led to the increasing of the friction coefficient and wear rate.

Microstructure, Mechanical Properties and High Temperature Tribological Behavior of NiAl-based Composites

The microstructure characteristics and self-lubrication mechanism of the NiAl matrix composites prepared by vacuum hot-pressing sintering

Microstructure, Mechanical and Tribological Properties of NiAl Matrix Composites with Addition of BaO/TiO2 Binary Oxides

Study on Microstructure of NiAl Matrix High Temperature Lubricating Composites Containing BaO/TiO2 Metallic Oxide

Microstructural and tribological characterization of NiAl matrix self-lubricating composite coatings by atmospheric plasma spraying

Investigation on Tribological Behavior of Ti2AlN/TiAl Composite at Room and Elevated Temperature

Investigation on Microstructure and Wear Behavior of the NiAl–TiC–Al2O3 Composite Fabricated by Self-Propagation High-Temperature Synthesis with Extrusion

Microstructure, Mechanical and Tribological Properties of Plasma-Sprayed NiCrAlY-Mo-Ag Coatings from Conventional and Nanostructured Powders

High temperature and room temperature tribological behaviors of in-situ carbides reinforced Ni-based composites by reactive sintering Ni and Ti2AlC precursor

Tribological Properties of in Situ Fe3al-20 Wt% Al2o3 Composites

Wear Properties of NiAl Based Materials

Microstructure and tribo-mechanical properties of APS-sprayed NiAl/Cr2AlC composite coatings with various additions of self-made Cr2AlC

Microstructure and mechanical properties of in situ NiAl-Mo2C nanocomposites prepared by hot-pressing sintering

Tribological performance and high temperature oxidation behaviour of thermal sprayed Ni- and NiCrAlY-based composite coatings

Tribological Properties of Spark Plasma Sintered NiCr–Cr2AlC Composites at Elevated Temperature

Tribological properties of NiAl-based composites containing Ag 3 VO 4 nanoparticles at elevated temperatures

Tribological properties of NiAl matrix composite coatings synthesized by plasma spraying method

Microstructure and Wear Behaviour of Ceramic Particles Strengthening Nial Based Composite

Effects of Ni-5 wt% Al/Bi2O3 addition and heat treatment on mechanical and tribological properties of atmospheric plasma sprayed Al2O3 coating

Tribological Behavior of In-Situ (cr, Mo)/Fe3al-20 Wt.%Al2o3 Composites at Elevated Temperatures

Microstructures, Mechanical and Oxidation Behaviors of C/C Composites Modified by NiAl Alloy