Abstract:The effect of composition tuning on glass forming ability (GFA), mechanical properties and atomic structure in ZrxCo84−xAl16 bulk metallic glasses (BMGs) with x = 51–58 has been investigated by using copper-mold suction casting, nanoindentation, high-energy X-ray diffraction, extended X-ray absorption fine structure experiments and ab initio molecular dynamics simulations, respectively. It is found that GFA firstly increases then decreases with increasing Zr content, exhibiting a maximum diameter of 7 mm with the Zr content of 55 and 56, while an abrupt reduction of bending plasticity occurs as the Zr content drops below 55. Both experimental and theoretical results find that GFA is remarkably enhanced, due to the abnormal reduction in the fractions of the Co-centered ⟨0, 2, 8, 1⟩, ⟨0, 3, 6, 2⟩ and ⟨0, 3, 6, 3⟩ polyhedra, and the denser atomic packing of Zr atoms around center Co atom, as the Zr content increases from 51 to 56. Meanwhile, the simultaneously improved plasticity is associated with the increased Co-centered ⟨0, 3, 6, 0⟩, and Al-centered ⟨0, 2, 8, 1⟩ and ⟨0, 3, 6, 2⟩ polyhedra, which provide more fertile sites for the nucleation of shear transformations. Further Zr addition to 58 increases remarkably the fractions of Zr- and Al-centered ⟨0, 1, 10, 2⟩ and ⟨0, 3, 6, 4⟩ polyhedra, and causes looser atomic packing of Co atoms around center Zr atom, leading to the reduction in GFA. However, the plasticity is not enhanced further but remains nearly constant, which may be related to the deteriorated effect on plasticity of the decreased fractions of Zr-centered ⟨0, 1, 10, 5⟩ and Co-centered ⟨0, 3, 6, 0⟩ polyhedra, and the increased fractions of Zr-centered ⟨0, 1, 10, 3⟩ and ⟨0, 2, 8, 4⟩ and Co-centered ⟨0, 2, 8, 0⟩ polyhedra. Compositional tuning, with internal structure tuned to favor both GFA and plastic flow, offers new possibilities in developing ductile BMG materials.

Multiple Maxima of GFA in Three Adjacent Eutectics in Zr–Cu–Al Alloy System – A Metallographic Way to Pinpoint the Best Glass Forming Alloys

Strategy for Pinpointing the Best Glass-Forming Alloys

Multiple Maxima in Glass-Forming Ability in Al–Zr–Ni System

Predicted Optimum Composition for the Glass-Forming Ability of Bulk Amorphous Alloys: Application to Cu-Zr-Al

Theoretical study on the composition location of the best glass formers in Cu-Zr amorphous alloys

Evaluation of the Optimum Solute Concentration for Good Glass Forming Ability in Multicomponent Metallic Glasses

Enhancement of Glass-Forming Ability and Plasticity Via Alloying the Elements Having Positive Heat of Mixing with Cu in Cu48Zr48Al4 Bulk Metallic Glass

Predictability of bulk metallic glass forming ability using the criteria based on characteristic temperatures of alloys

A study of the glass forming ability in ZrNiAl alloys

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Bulk Metallic Glass Formation in the Binary Cu–Zr System

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

Correlation of the Glass Formation and Phase Selection of the Mg-Cu-Gd Bulk Metallic Glass Forming Alloys

Glass forming ability and bending plasticity evolutions in Zr-Co-Al bulk metallic glasses and their structural origin

Locating bulk metallic glasses with high fracture toughness: Chemical effects and composition optimization

Structural Origin of the High Glass-Forming Ability in Y-Doped Bulk Metallic Glasses

A New Criterion for Predicting the Glass-Forming Ability of Bulk Metallic Glasses

Composition Optimization of the NiZrYAl Glass Forming Alloys

Doubling the Critical Size for Bulk Metallic Glass Formation in the Mg−Cu−Y Ternary System

Designing aluminum-rich bulk metallic glasses via electronic-structure-guided microalloying

Synthesis,structure and Mechanical Properties of Zr-Cu-based Bulk Metallic Glass Composites