Abstract:This study attempts to clarify the correlation between the structural parameters of vortex finders (diameter ratio and insertion depth) and the strong turbulent flow field and performance of cyclone separators. To elucidate the effects due to the overflow pipe diameter, insertion depth, and Reynolds number on the tangential velocity index (n) and separation efficiency, 0.3D, 0.4D, 0.5D, 0.6D, and 0.7D (where D is the diameter of the cyclone separator’s cylindrical section) were selected as the vortex finder diameter and insertion depth, which were studied using three methods: computational fluid dynamics (CFD) software Fluent, experiments, and artificial neural network simulations. With Fluent, the Reynolds stress model (RSM) of turbulence was adopted to describe transport equations, and the discrete phase model (DPM) for two-phase flow was used to calculate the efficiency and separate particles at different inlet velocities. Experiments were conducted to measure the operational pressure drop and separation efficiency of the system; subsequently, the results were used to validate the CFD calculation results. Finally, a 5–5-1 three-layer artificial neural network was established based on 336 sets of data for values of n obtained from numerical simulations. In addition, a backpropagation (BP) artificial neural network model was employed to predict the correlation between the structural and operational parameters of the cyclone separator and n values. The obtained results indicate that the BP artificial neural network can accurately predict the distribution of n values within the flow field of the cyclone. Increasing the diameter of the vortex finder with the same inlet velocity can reduce the total pressure drop due to the cyclone, thereby reducing the kinetic energy loss and improving the separation efficiency of fine particles. Increasing the insertion depth of the vortex finder leads to an increase in the values of n. Considering the stability of the flow field structure and energy dissipation, an S/D value between 0.5 and 0.6 is preferred.

Analysis and Improvement of the Profile of an Inertia Particle Separator

Experimental Study and Numerical Simulation of the Characteristics of a Percussive Gas–solid Separator

Structural Parameter Optimization of Hydraulic Vertox Separator in Recirculating Biofloc Technology System Based on Computational Fluid Dynamics

Airfoil Parameterization Evaluation Based on a Modified PARASEC Method for a H-Darrious Rotor

Numerical Study of Wall Roughness Effect Particle Separator Performance of the Helicopter Particles

Measurement and Analysis on Flow Structure of Inertial Particle Separator

Sand Discharge Simulation and Flow Path Optimization of a Particle Separator

Performance Investigation of Double V Type Inertia Separator

Multi-objective optimization of a novel vortex finder for performance improvement of cyclone separator

An Experimental Study of the Structural Optimization of Square Shaped Cyclone Separators

Simulation and experimental study of effect of vortex finder structural parameters on cyclone separator performance

Optimization of Structural Parameters for Corrugated Plates Separator With Single Scoop

Effect of Internally Mounted Helical Fins on the Separation Performance of a Cylindrical Gas-Solid Cyclone Separator

The Influences of Relative End Face Ratio on Main Performances for the Cyclone Separator

Numerical study on the performance of swirl tube based on orthogonal design

Effects of helical fins on the performance of a cyclone separator: A numerical study

Parametric analysis and optimization of gas-particle flow through axial cyclone separator: A numerical study

Performance Investigation and Optimization of the Primary Separation Part of the Oil-Gas Separator

Multi-objective optimization of axial-flow-type gas-particle cyclone separator using response surface methodology and computational fluid dynamics

Experimental Study of the Separation Performance of a Square Separator Assuming a Horizontal Heat Exchange Mode

Enhancement of particle collection efficiency considering the structural interplay: particle motion characteristics analysis