Abstract:Abstract The paper summarizes the results of research on gas products of polypropylene (PP) radiolysis. Particular attention was paid to the phenomena of post-radiation degradation of PP. The protective effect of selected aromatic compounds was investigated. The research was carried out both from the point of view of obtaining radiation-resistant PP varieties and the possibility of accelerating biodegradation phenomena, e.g., PP/cellulose composition. The phenomena of post-radiation chain oxidation of PP were investigated by gas chromatography (GC). The GC in the system used (packed column, thermal conductivity detector, argon – carrier gas) enables the determination of H 2 , O 2 , CO, and CH 4 in one measurement. The samples were irradiated with electron beams (EBs) accelerated in accelerators: Elektronika 10/10 with a power of 10 kW and energy of 10 MeV and LAE 13/9 with a power of 9 kW and energy up to 13 MeV. In the tests, PP without stabilizing additives (obtained directly from the production line) and non-stabilized styrene were used. Radiolytic efficiency of hydrogen evolution allowed us to estimate the number of originally formed free radicals. The maintenance of the secondary oxidation processes was the loss of oxygen and the formation of oxidation products (CO, CH 4 ). Attention is paid to the protective effect of aromatic compounds (polystyrene (PS), polyethylene terephthalate (PET), anthracene, fluoranthene, acenaphthene, pyrene, naphthalene) both at the stage of hydrogen atom separation and the secondary oxidation process. The examples of post-radiation oxidation of PP irradiated in cryogenic conditions (–196°C) are presented. All used aromatic compounds showed a protective effect in PP radiolysis. We suppose that this phenomenon is responsible for the charge transfer along the polymer chain from the ionization spurs to the aromatic compound. The protective ranges of PS in PP radiolysis were estimated for the variously prepared PP/PS type compositions from 6 mers to 28 mers.

The Effects of Chemical Structure and Synthesis Method on Photodegradation of Polypropylene

Photodegradation behavior of polypropylene with different crystalline modifications

Effects of UV‐irradiation on the Nonisothermal Crystallization Kinetics of Polypropylene

Probing into the microstructural evolution of isotactic polypropylene during photo-oxidation degradation

Photooxidative degradation and fragmentation behaviors of oriented isotactic polypropylene

Experimental XPS Investigation of Thermal Decomposition of Polypropylene

Effect of Environmental Temperature on Ultraviolet Irradiated Pp and Its Composite

Effect of Structure and Morphology on Photo-Oxidation Degradation of Polyethylene

The Effect of Tunable Modification Parameters on the Structure and Properties of Polypropylene with Cyclotrimerization Surface of Isocyanates

Effect of microstructure tuning by rapid heat cycle molding on the photodegradation behavior of isotactic polypropylene

Effects of polypropylene compositions and processing conditions on its aging resistance under tropical environments

Study on Controlled Degradation of Polypropylene

Different transition metal combinations of LDH systems and their organic modifications as UV protecting materials for polypropylene (PP)

The Effect of PP and Peroxide on the Properties and Morphology of HDPE and HDPE/PP Blends

Influence of rutile-type TiO2 on photodegradation of polypropylene fiber

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Effect of Radiation on the Crosslinking and Branching of Polypropylene

GC investigation of post-irradiation oxidation phenomena on polypropylene

Developing Polypropylene Bonded Hindered Phenol Antioxidants for Expanding Polypropylene Applications in High Temperature Conditions

Investigation on the structure and crystallization behavior of controlled-rheology polypropylene with different stereo-defect distribution

Effect of Light Intensity on Ultraviolet Irradiated Polypropylene and Its Compatibilization with CaCO3