Abstract:Polymer nanocomposites have attracted great attention because of the demand for polymer materials with high performance and high functionality at the same time. Nano CaCO3 and SiO2 can be used to improve the rigidity of polypropylene (PP), which is quite importance for biaxial orientation PP film. However, the effect of these nano fillers on natural photo-oxidation degradation of PP has not been studied. In the present paper, the natural photo-oxidation profiles along the depth of PP and PP nanocomposites bars were studied with infrared microscope (IM) as well as polarizing lighu microscope (PLM) and scanning electron microscope (SEM). The results indicated that nano CaCO3 and SiO2, especially the latter, accelerated the oxidation rate of PP significantly, with more and deeper surface cracks. Larger amount of nano filler gave rise to greater oxidation degradation. The existence of nano CaCO3 and SiO2 helped to diminish the spherulite and broaden the transition region from amorphous to crystal The oxidation development along the depth in PP nanocomposites depended on the diffusion rate of oxygen and underwent two stages. In the first stage, the oxidation degree increased with time because of the low density in the transition region. In the layer under this region, the oxidation is difficult to occur owing to the high density of crystals and oxygen starvation. Therefore, the oxidation depth profiles decreased to near zero at nearly the same depth--about 200 microm from the exposed surface, corresponding to the transition region in PLM observation, namely surface oxidation layer. The high degree of oxidation in the surface layer gave rise to crack formation, and these surface cracks helped further oxidation in PP nanocomposites. In the second stage, the interconnection of surface cracks resulted in the fracture of the seriously oxidized surface oxidation layer. Consequently, the oxidation of the subsurface layer began and the depth profile developed to deeper place. In PP, the much thinner surface amorphous layer and the relatively perfect crystallization under it were responsible for the higher stability during the natural exposure.

Photodegradation behavior of polypropylene with different crystalline modifications

The Effects of Chemical Structure and Synthesis Method on Photodegradation of Polypropylene

Probing into the microstructural evolution of isotactic polypropylene during photo-oxidation degradation

Effects of UV‐irradiation on the Nonisothermal Crystallization Kinetics of Polypropylene

Photooxidative degradation and fragmentation behaviors of oriented isotactic polypropylene

Polymorphic Crystals from Different Thermal Treatments and Its Effect on Biodegradation Behavior of Poly(butylene Adipate)

Markedly improved photo-oxidation stability of α form isotactic polypropylene with nodular morphology

Experimental XPS Investigation of Thermal Decomposition of Polypropylene

Study on the Effects of Nucleating Agents on Photooxidation Degradation of Pp by Ftir and Im

Effect of Structure and Morphology on Photo-Oxidation Degradation of Polyethylene

[Study on Natural Photo-Oxidation Degradation of Polypropylene Nanocomposites by Infrared Microscopy].

Deformation Mechanisms of Polymer Thin Films by Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism and Macroscopic Stress. 2. Molecular Orientation During Necking Process of Isotactic Polypropylene

Effect of Light Intensity on Ultraviolet Irradiated Polypropylene and Its Compatibilization with CaCO3

Additive Effects of N,N,N′,N′ -Tetraalkyl Terephthalamide on Crystalline Morphology and Mechanical Properties of Polypropylene

Investigation on thermal degradation mechanism of poly(phenylene sulfide)

The Observation of PP/EVA Blends in Which Isotactic PP Was Preradiated with Different Radiation Absorbed Doses

Effect of microstructure tuning by rapid heat cycle molding on the photodegradation behavior of isotactic polypropylene

Effect of Environmental Temperature on Ultraviolet Irradiated Pp and Its Composite

Visualization of Recrystallization Induced by Ultraviolet Degradation of a Polypropylene Film Using Raman Imaging

Effects of Irradiation on the Melting and Crystallization Behavior of Ethylene Polymers with Different Thermal History

β-Crystalline polypropylene and its applications