Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Thermostabilising and Nucleating Effect of Montmorillonite on Polyoxymethylene

Study on thermal stability of PP/MMT nanocomposites

Influence of OMMT on Halogen-free Flame Retardant PC/ABS Blends

Effect of Oligomeric‐modified Montmorillonite on Morphology and Properties of Polycarbonate/montmorillonite Nanocomposites

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Effect of compound organification of montmorillonite on the structure and properties of polypropylene/montmorillonite nanocomposites

Study on Poly(ether Ether Ketone)/organically Modified Montmorillonite Composites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Effect Of Polymer Matrix/Montmorillonite Compatibility On Morphology And Melt Rheology Of Polypropylene Nanocomposites

Preparation and Characterization of Polybutylene Terephthalate/ Polymethyl Methacrylate Ammonium Salts Modified Montmorillonite Nanocomposites

The Preparation of Calcium Pimelate Modified OMMT from Natural Ca-montmorillonite and Its Application As Β-Nucleating Agent for Polypropylene

Poly(ethylene naphthalate)/clay nanocomposites based on thermally stable trialkylimidazolium-treated montmorillonite: thermal and dynamic mechanical properties

Effect of Morphology and Composition of Organic Montmorillonite on the Structure and Properties of Poly(Butylene Terephthalate) Nanocomposites

Effect of Montmorillonite on Morphology, Rheology, and Properties of a Poly[styrene–(ethylene-Co-butylene)–styrene]/poly(ɛ-caprolactone) Nanocomposite

Thermal and Mechanical Properties of Polyurethane/montmorillonite Nanocomposites Based on a Novel Reactive Modifier

Organic Montmorillonite Modified Polyacrylate Nanocomposite By Emulsion Polymerization

Synthesis of Poly (hexamethylene Terephthalamide)-Co-polycaprolactam/modified Montmorillonite Nanocomposites with Enhanced Mechanical Properties and Lower Water Absorption Rate by In-Situ Polymerization

Synthesis and Mechanical Properties of PE/O-Mmt Composites

Effect of Montmorillonite on the Crystallization, Rheological and Physical Behavior of Polyamide-6/Polylactic Acid Blends

Effects of Montmorillonite on Structures and Properties of Injection-Molded Polypropylene