Abstract:To meet the high requirements for positioning accuracy and multiple dimensions of positioning systems in the fields of precision measurement and precision machining, a new submicron-precision three-dimensional (3D) low cross-interference positioning system is designed and fabricated in this paper. The 3D motion stage mainly includes a mechanical structure, a support and guide system, and a driving system. The Abbe offset error is eliminated by adopting a coplanar structure in the X and Y directions, thus minimizing the mutual cross-interference of the motion stage. The X and Y motion stages are driven by a ball screw pair and an alternating current servo motor, which are supported and guided by an air-floating rail and slider. Moreover, the X and Y air-floating stages adopt a lateral structure and double rails, respectively. The Z-motion stage is directly driven by a high-precision piezoelectric motor. In addition, the system achieves high-precision motion by using the dual-loop control technology of secondary feedback combined with the high-resolution control characteristics of the servo motor. The performance of the positioning system is evaluated through a series of verification experiments. Results show that the stroke of the positioning system of the 3D air-floating motion stage can reach 100 × 100 × 100 mm3, and the repeated positioning accuracy is better than 0.41 μm (k = 2, k is defined by the International Organization for Standardization as the coverage factor). The maximum cross-interference of the X-stage is 180 nm, and the Y-stage reaches 320 nm when running with a full stroke of 100 mm in the Z-direction, demonstrating good repeatability, stable running, and high straightness. The submicron-precision 3D air-floating motion stage developed in this paper can be used as a suitable solution for coordinate measuring machines, microlithography, and micromachining applications when combined with an additional nanoprecision microstage.

A Measurement System for Step Imprint Lithography

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

A Novel Method to Simultaneously Measure the Straightness

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Mathematic Model of Simultaneously Measuring Six-dimensional Parameters by Laser

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

Rapid Measurement Of A High Step Microstructure With 90 Degrees Steep Sidewall

Design and Analysis of a Long-Stroke and High-Precision Positioning System for Scanning Beam Interference Lithography

Real-time Displacement Calculation and Offline Geometric Calibration of the Grating Interferometer System for Ultra-Precision Wafer Stage Measurement

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

Fast Wafer Focus Measurement System for Photolithography Using On-Axis Structure Illumination Method

Ultraprecision Grating Positioning Technology for Wafer Stage of Lithography Machine

Research of Plane Wafer Stage's 6-DOF Ultra-preci-sion Displacement Measurement

Design and Control of Ultra-Precision Fine Positioning Stage for Scanning Beam Interference Lithography

Progress on scanning beam interference lithography tool with high environmental robustness for patterning large size grating with nanometre accuracy

On-Machine Measurementand Characterization of V-Groove Structure Pattern on Precision Rollers

Development of submicron precision three-dimensional low cross-interference air-floating motion stage

Ultra-precision Motion Control and Synchronization Control for Stage of Lithography