Abstract:A constant displacement amplification ratio is less investigated in compliant mechanisms. This study addresses this need by presenting an over-constraint based nearly-constant amplification ratio compliant mechanism (OCARCM) that alleviates the change in displacement amplification ratio. The free-body diagram (FBD) combined with the generic beam constraint model (BCM) method is employed to obtain the closed-form solutions that accurately and insightfully elaborate the nonlinear kinetostatic characteristics of the OCARCM. Comparative analysis is provided between the proposed OCARCM and the widely-used bridge-type compliant amplifier in terms of the ability to remain a constant amplification ratio, with and without external payloads. The closed-form models are verified by the nonlinear finite element results (FEA) with a maximum difference of 1%. In our case studies, it shows that the amplification ratio of the OCARCM changes by 1% over the range, while that of the bridge-type amplifier changes by approximately 14% under the same conditions. The results also reveal that a higher amplification ratio results in a greater variation in the ratio. An experiment based on the CNC machined aluminium alloy prototype with distributed-compliance is conducted, and experimental results show a maximum error of 3.4% for the amplification ratio compared with the analytical or FEA results.

Design and Analysis of Fully Compliant Micro-Displacement Amplification Mechanisms

Theoretical Modeling of Attenuated Displacement Amplification for Multistage Compliant Mechanism and Its Application

A novel bridge-type compliant displacement amplification mechanism under compound loads based on the topology optimisation of flexure hinge and its application in micro-force sensing

Optimized design of a compact multi-stage displacement amplification mechanism with enhanced efficiency

Analysis on the Displacement Performances of Parallel Four-Bar Flexure Hinge Mechanism

Displacement Loss Of Flexure-Hinged Amplifying Mechanism

Analysis and Optimization of Dynamic and Static Characteristics of the Compliant-Amplifying Mechanisms

Optimal design and reliability analysis of a compliant stroke amplification mechanism

Analysis and optimal design a new flexible hinge displacement amplifier mechanism by using Finite element analysis based on Taguchi method

Nonlinear Design, Analysis, and Testing of a Single-Stage Compliant Orthogonal Displacement Amplifier with a Single Input Force for Microgrippers

Design And Analysis Of Two Dimensional X-Y Micropositioning Stage

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Parametric Finite Element Analysis Of Output Displacement Affected By Machining Errors Of Flexure Hinge Mechanism

Enhanced mathematical modeling of the displacement amplification ratio for piezoelectric compliant mechanisms

Design and modeling of a compact compliant stroke amplification mechanism with completely distributed compliance for ground-mounted actuators

Theoretical Design and Modeling of a Novel Piezo-driven Rhombic Flexure Mechanism with Double Beams

Design of an over-constraint based nearly-constant amplification ratio compliant mechanism

Modeling and Analysis of a Conical Bridge-Type Displacement Amplification Mechanism Using the Non-Uniform Rational B-Spline Curve

Linear and nonlinear analytical equations for fast design of three types of triangular-amplified compliant mechanisms

Displacement Amplification Using a Compliant Mechanism for Vibration Energy Harvesting

Optimization of a Compliant Mechanical Amplifier Based on a Symmetric Five-Bar Topology