Abstract:Multi-actuated rigid-flexible dynamic system exists widely in precision machinery and electrical control fields. The performances, such as kinematic, dynamic, electrical, magnetic, and thermal performances, are correlated and difficult to trap precisely. Therefore, a multi-actuated mechanism design method considering structure flexibility using correlated performance reinforcing is put forward. A system containing flexible subparts with multi degrees of freedom (DOF) with physical coordinate is converted into modal coordinate using ‘DOF×modal order’ square matrix. The structure flexibility is described by modal superposition of the shape mode which is considered as additional generalized coordinates. A dynamic equation with large DOF is formulated and reduced based on Craig-Bampton modal truncation. Using analogical design methodology with and without structure flexibility of the low voltage circuit breaker (LVCB), the extent of the performance impact of each subpart is obtained by calculating correlated Holm force, Lorentz force, electrodynamic repulsion force, electromagnetic force, and cantilevered bimetallic strip force. Design of experiments method is employed to reveal the hard-measuring properties using correlated relatively easy-measuring parameters. The trip mechanism is validated by an electrical performance experiment. results show that the structure flexibility can decrease the tripping velocity, which is non-negligible, especially for high frequency tripping. The method provides a reference significance for similar multi-actuated mechanism design.

Design of an over-constraint based nearly-constant amplification ratio compliant mechanism

Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Theoretical Modeling of Attenuated Displacement Amplification for Multistage Compliant Mechanism and Its Application

Optimal design and reliability analysis of a compliant stroke amplification mechanism

Analysis and Optimization of Dynamic and Static Characteristics of the Compliant-Amplifying Mechanisms

Development of a Multistage Compliant Mechanism with New Boundary Constraint

Design and modeling of a compact compliant stroke amplification mechanism with completely distributed compliance for ground-mounted actuators

A novel bridge-type compliant displacement amplification mechanism under compound loads based on the topology optimisation of flexure hinge and its application in micro-force sensing

Linear and nonlinear analytical equations for fast design of three types of triangular-amplified compliant mechanisms

Optimized design of a compact multi-stage displacement amplification mechanism with enhanced efficiency

Design of compliant constant-output-force mechanisms using topology optimization

Nonlinear Design, Analysis, and Testing of a Single-Stage Compliant Orthogonal Displacement Amplifier with a Single Input Force for Microgrippers

Design and optimization of compliant constant-torque mechanisms utilizing arbitrary pre-curved beams

Enhancing Dynamic Bandwidth of Amplified Piezoelectric Actuators by a Hybrid Lever and Bridge-Type Compliant Mechanism

Modeling and Analysis of a Conical Bridge-Type Displacement Amplification Mechanism Using the Non-Uniform Rational B-Spline Curve

Large-Stroke Constant-Force Mechanisms Utilizing Second Buckling Mode of Flexible Beams: Evaluation Metrics and Design Approach

Design and Analysis of a Symmetric Overconstrained Compliant Tilt/Tip Stage Based on a Hybrid Transmission Ratio Model

Enhanced mathematical modeling of the displacement amplification ratio for piezoelectric compliant mechanisms

Synthesis and modelling of one rotational constraint orientated compliant mechanisms

Compliant Mechanism Synthesis Using Nonlinear Elastic Topology Optimization With Variable Boundary Conditions