Abstract:The synthesis and properties of RPUF‐P and RPUF‐PPOA. Two types of bio‐based RPUFs (RPUF‐P and RPUF‐PPOA) were prepared that contained ethanol‐modified polyols (Polyol‐E) and one contained an epoxidized polyol modified with phosphoric acid (Polyol‐P), and the other contained epoxidized polyol modified with phenylphosphonic acid (Polyol‐PPOA). The cell morphologies, thermal and mechanical properties, and flame retardancy characteristics of the RPUF, RPUF‐P, and RPUF‐PPOA were studied by scanning electron microscopy (SEM), thermogravimetric analysis(TGA), compression tests, limiting oxygen index (LOI), and cone calorimetry test (CCT). The porous structures revealed that the cell sizes of both RPUF‐P and RPUF‐PPOA increased first and then decreased, and the number of pores decreased first and then increased. Furthermore, the apparent density showed a similar trend of increasing before decreasing. The compressive strengths of the RPUF‐P and RPUF‐PPOA were higher than that of the RPUF, and the compressive strength of the RPUF‐P was better than that of the RPUF‐PPOA, because the hydroxyl value of the Polyol‐P was much higher than that of the Polyol‐PPOA. The crosslinking density of the RPUF‐P prepared by the PM‐200 reaction was much higher than that of the RPUF‐PPOA. The LOI values of the RPUF‐P4 and RPUF‐PPOA4 were 21.68 and 23.10, respectively. Furthermore, the value of the peak of the heat release rate (HRR) was reduced by 40.3% compared with that of pure RPUF. The total heat release (THR), smoke produce rate (SPR), and total smoke release (TSR) decreased with increased Polyol‐P and Polyol‐PPOA addition. The flame‐retardancy residues micrographs showed that the carbon layers generated from the combustion of the RPUF‐P4 and the RPUF‐PPOA4 lacked perforated structures and exhibited better densification than the pure RPUF. Based on the analysis and discussion, the flame retardancy of RPUF‐P and RPUF‐PPOA were improved mainly through a condensed and gas phases mechanism.

Application of Castor Oil Polyol in the Flame-Retardant Rigid Polyurethane Foam

Preparation and properties of bio‐based flame‐retardant rigid polyurethane foams with soybean oil polyols containing phosphorus

Preparation of flame‐retardant rigid polyurethane foam with bio‐based phosphorus‐containing polyols and expandable graphite

Bio-based rigid polyurethane foam from castor oil with excellent flame retardancy and high insulation capacity via cooperation with carbon-based materials

High-performance flexible polyurethane from renewable castor oil: Preparation, properties and mechanism

Synthesis of a green reactive flame‐retardant polyether polyol and its application

Phosphorus and Nitrogen-Containing Polyols: Synergistic Effect on the Thermal Property and Flame Retardancy of Rigid Polyurethane Foam Composites

Effect of Flame-Retardants Additive on the Flame Retardancy of Rigid Polyurethane Foam

Highly Efficient Flame Retardancy and Fire Spread Behavior of Rigid Polyurethane Foams with extremely low content of Flame Retardant

Reactive flame-retardants prepared by transesterification between erythritol and dimethyl methyl phosphonate for rigid polyurethane foams

Improved thermal stability and flame retardancy of soybean oil-based polyol rigid polyurethane foams modified with magnesium borate hydroxide and ammonium polyphosphate

Preparation and intrinsical flame resistance of reed-based polyurethane foam modified by 9,10-dihydro-9-oxa-10 phosphaphenanthrene 10-oxide

Flame Retarded Rigid Polyurethane Foams Composites Modified by Aluminum Diethylphosphinate and Expanded Graphite

Preparation and properties investigation of flame‐retardant rigid polyurethane foam composites based on alkylphosphate oligomer

Aluminum Hypophosphite in Combination with Expandable Graphite As A Novel Flame Retardant System for Rigid Polyurethane Foams

Hemp Seed Oil Derived Rigid Polyurethane Foams and Their Underlying Flame Retardancy Properties

Enhanced flame‐retardant performance of rigid polyurethane foam by using APTES‐MMT and ATH mixed intumescent coatings

Flame retardant rigid polyurethane foam composites based on hexaphenoxycyclotriphosphonitrile: flame retardancy, combustion properties and pyrolysis kinetics

Preparation of bio‐based soybean oil polyol modified 3630 polyol‐based rigid polyurethane foam and its improved thermal stability, flame retardant, and smoke suppression performances

Effect of microencapsulated long‐chain chlorinated paraffin on flame retardant of rigid polyurethane foam

Green flame-retardant rigid polyurethane foam with cobalt hydroxystannate to improve the thermal stability, flame retardancy and smoke suppression properties