Abstract:Since the 1960s, it has been a common practice worldwide to pursue a homogeneous distribution of reinforcements within a matrix material, discontinuous metal matrix composites (DMMCs) in particular. Taking an overview of the worldwide activities in DMMC research, despite many favourable attributes such as improved specific strength, stiffness and superior wear resistance, DMMCs with a homogeneous microstructure tend to exhibit a very low room temperature damage tolerance even with a highly ductile matrix material such as aluminium. In this review, a range of uniquely multi-scale hierarchical structures have been successfully designed and fabricated by tailoring reinforcement distribution for DMMCs in order to obtain superior performance. A variety of specific microstructures that were developed in Al, Mg, Cu, Fe, Co and TiAl matrices indicate that there must be adequate plastic regions among the reinforcements to blunt or deflect cracks if one wants to toughen DMMCs. Following this path, aided by theoretical analyses, the most recent success is the design and fabrication of a network distribution of in situ reinforcing TiB whiskers (TiBw) in titanium matrix composites (TMCs), where a tailored three-dimensional (3D) quasi-continuous network microstructure displays significant improvements in mechanical properties. This resolves the brittleness surrounding TMCs fabricated by powder metallurgy. It is the large reinforcement-lean regions that remarkably improve the composite’s ductility by bearing strain, blunting the crack and decreasing the crack-propagation rate. The fracture, strengthening and toughening mechanisms are comprehensively elucidated in order to further understand the advantages of such an inhomogeneous microstructure, and to justify the development of novel techniques to produce such inhomogeneous microstructures. This approach opens up a new horizon of research and applications of DMMCs and can be easily extended to general multi-phase composites with enhanced physical and mechanical properties.

Study on Microstructure and Tensile Properties of in Situ Fiber Reinforced Aluminum Matrix Composites

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Novel MMC microstructure with tailored distribution of the reinforcing phase

In situ (Al3Zr + Al2O3np)/2024Al metal matrix composite with novel reinforcement distributions fabricated by reaction hot pressing

Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?

Microstructures and Mechanical Properties of Engineered Short Fibre Reinforced Aluminium Matrix Composites

Microstructure, Tensile Properties and Deformation Behaviors of Aluminium Metal Matrix Composites Co-Reinforced by Ex-Situ Carbon Nanotubes and In-Situ Alumina Nanoparticles

Microstructural characteristic and mechanical properties of the in-situ MgAl2O4 reinforced Al matrix composite based on Al-Mg-ZnO system

Microstructure and Tensile Properties of In-Situ TiAl Nanoparticles Reinforced AZ31 Composites

Extraordinary Reinforcing Effect of Carbon Nanotubes in Aluminium Matrix Composites Assisted by In-Situ Alumina Nanoparticles

Processing, Microstructure and Mechanical Properties of in Situ Al‐based Metal Matrix Composite Reinforced with 22 Wt%wal12 Particles

In situ strength distribution of carbon fibers in unidirectional metal-matrix composites-wires

Fabrication and Characteristics of in Situ Al12w Particles Reinforced Aluminum Matrix Composites by Reaction Sintering

Preparation and Mechanical Properties of in Situ Submicron MgAl2O4p/6061Al Composites from Al–Mg–SiO2 System

Structure, Thermal and Mechanical Properties of in Situ Al-Based Metal Matrix Composite Reinforced with Al2o3 and Tic Submicron Particles

Microstructure and Mechanical Properties of In-Situ Α-Al2o3p/al-12si Composites Fabricated by Direct Melt Reaction Method with Aid of Electromagnetic Stirring

Fabrication and Microstructure of in Situ Toughened Al2o3/Fe3al

Microstructure and Mechanical Properties of in Situ Synthesised (Tic+tib)/ti-6Al-4v Composites Prepared by Powder Metallurgy

Study on Microstructure and Tensile Property of Sub-micron MgAl2O4(p)Al-Mg-Si Composite

In Situ Synthesis And Compressive Deformation Behaviors Of Tic Reinforced Magnesium Matrix Composites

Microstructure and properties of in situ Ti-Al intermetallic compound-reinforced Al matrix composites with dispersive distribution of core-shell-like structure