Abstract:The strength and ductility of transition metallic element alloyed Al alloys could be inevitably and severely weakened if these elements appeared as coarse intermetallics. Present studies aimed to optimize the morphologies and sizes of these intermetallics via composition design and process selection so as to decrease their detrimental effects to the properties. It is shown that the dendritic α-Al(Fe,TM)Si phase solidified as primary phase can be refined into small dendrites or micro- and submicro-sized particles via controlling the cooling rate and alloy composition, and this phase exhibits better heat resistance. After spark plasma sintering (SPS) the atomized alloy powders, the bulk aluminum matrix composites (AMCs) were successfully prepared and well strengthened by the uniformly distributed particulate α-Al(Fe,TM)Si phase. These sintered bulk composites also possess good heat resistance that might facilitate their application for some heat-resistant parts. The transmission electron microscope (TEM) and high-resolution TEM (HRTEM) results indicate these α-Al(Fe,TM)Si phases possesses body-centered-cubic structure with a lattice constant of 1.25 to 1.27 nm. The solidification or phase formation of these alloys is discussed as well as the densification process for the SPS of powders. The present studies indicate a possibility to prepare in situ small dendritic/particulate α-Al(Fe,TM)Si phase reinforced AMCs by using the casting process and controlling the normal impurity elements in Al alloys.

Processing, Microstructure and Mechanical Properties of in Situ Al‐based Metal Matrix Composite Reinforced with 22 Wt%wal12 Particles

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

In situ (Al3Zr + Al2O3np)/2024Al metal matrix composite with novel reinforcement distributions fabricated by reaction hot pressing

In situ (Al3Zrp+Al2O3np)/2024Al metal matrix composite with controlled reinforcement architecture fabricated by reaction hot pressing

In Situal3ti–al2o3 Intermetallic Matrix Composite: Synthesis, Microstructure, and Compressive Behavior

Fabrication and Characteristics of in Situ Al12w Particles Reinforced Aluminum Matrix Composites by Reaction Sintering

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

In–situ synthesis of an Al composite reinforced with multi–scale Al12Mo, (Al, Zr, Si) and Al2O3 particles through a multi–stage reaction

Structure, Thermal and Mechanical Properties of in Situ Al-Based Metal Matrix Composite Reinforced with Al2o3 and Tic Submicron Particles

Synthesis and Characterization of In Situ Dendritic/Particulate α-Al(Fe,TM)Si Phase Reinforced Al Matrix Composites

Microstructure and Mechanical Properties of an Al–Ni–Co Intermetallics Reinforced Al Matrix Composite

Microstructural characteristic and mechanical properties of the in-situ MgAl2O4 reinforced Al matrix composite based on Al-Mg-ZnO system

Processing, Microstructure and Mechanical Properties of Ti6Al4V Particles-Reinforced Mg Matrix Composites

Microstructure and Mechanical Properties of In-Situ Α-Al2o3p/al-12si Composites Fabricated by Direct Melt Reaction Method with Aid of Electromagnetic Stirring

Preparation and Mechanical Properties of in Situ Submicron MgAl2O4p/6061Al Composites from Al–Mg–SiO2 System

Microstructure and Mechanical Properties of MoAlB Particles Reinforced Al Matrix Composites by Interface Modification with in Situ Formed Al12Mo

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

Microstructure and properties of spray-deposited 2014+15 vol pct SiC particulate-reinforced metal matrix composite

In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites

Microstructure and Mechanical Properties of Multiphase Strengthened Al/Si/Al 2 O 3 /SiO 2 /MWCNTs Nanocomposites Sintered by In Situ Vacuum Hot Pressing

Ultrasound assisted in situ technique for the synthesis of particulate reinforced aluminum matrix composites