Abstract:Utilizing low-rank coals in power plants takes a risk of slagging, especially when burning coals rich in alkali and alkaline earth metallic (AAEM) elements. To predict the slagging propensity of low-rank coals, this work develops a novel approach for accurately measuring the sticking probability of thermally stable slag samples based on the well-controlled flat-flame system. We collect deposit samples (PSD) severely accumulated on the platen superheater surface of a 660 MW boiler co-firing two low ranks (alkali-rich Phi-coal: iron-rich Ind-coal = 15.2 wt%: 84.8 wt%). It is found that the existing theoretical models can hardly reproduce the measured sticking probability at elevated temperatures. We thus propose an Sshaped nonlinear correlation of ash sticking probability with the melt fraction using two tuning parameters. The fully-sintered PSD slag is mainly composed of refractory anorthite (CaAl 2 Si 2 O 8 ) and hematite (Fe 2 O 3 ), which are largely determined by the dominant Ind-coal ash fed into the boiler. However, the excessive accumulation of PSD can only be attributed to the much stickier Phi-coal ash rich in lowmelting-point, dispersed Na-aluminosilicates. Combining the measured sticking probability and physicochemical properties of the slag and ash samples, we reveal a positive correlation of the ash sticking probability with the sodium content of the samples, almost regardless of the contents of alkaline earth metals and iron. It highlights the leading role alkali metals play in slagging. In contrast, iron exists as discrete hematite (Fe 2 O 3 ) in the slag and is less effective than AAEM in forming slags on the platen superheater. Our work provides a more reliable method and criterion for evaluating the slagging propensity of fully/partially-molten particles in solid fuel combustion. (c) 2021 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

An All-around Slagging Propensity Decision Model for CWS

Application of Fuzzy Set for Slagging Propensity Decision in Boilers Burning CWS

A prediction method of slagging behavior for pulverized coal by using test method of sedimendation furnace

APPLICATION OF FUZZY PATTERN IDENTIFICATION FOR SLAGGING CHARACTERISTICS JUDGEMENT IN COAL-WATER-SLURRY FIRED BOILER

A MODEL FOR OVERALL SLAGGING DIAGNOSIS IN PULVERIZED-COAL FIRED BOILERS

Slagging Fuzzy Integrated Judgment Model with Nonlinear Function Based on Coal Ash Component

Experimental Investigation of the Scaling-Off Location and the Slag Mass in Pulverized Coal-Fired Boiler with Water-Cooled Slag Removal

FUZZY COMPREHENAIVE JUDGMENT OF SLAGGING TENDENCY IN COAL-WATER SLURRY FIRED BOILER AT LIAOHE OIL FIELD

Slagging behavior modeling in coal gasifiers using two-way coupled slag model with CFD

Experimental Study on Slagging Characteristic of Low-volatile Coal Water Slurry in a 220t/h Boiler

Forecasting Slagging Characteristic of Coal Ash Using Fuzzy Neural Network Method

Mechanistic Studies on the Slagging Propensity in Low-Rank Coal Combustion

Mathematical model for design of optimized multi-component slag for electroslag remelting

Research Progress of Numerical Simulation of Slagging in Pulverized Coal Boiler

Improvement of slagging monitoring and soot-blowing of waterwall in a 650MWe coal-fired utility boiler

Slag Characteristic Evaluation Based on Supporting Vector Machine

Development and validation of slagging model for typical coals in drop-tube furnace

Simulation of Ash Deposit in A Pulverized Coal-Fired Boiler

Soot﹣blowing optimization of boiler heating surface based on thermal performance mechanistic model and fuzzy comprehensive evaluation

Slagging inhibition through co-firing of coal gangue and high sodium coal: An experimental and modelling study

Multi-model coupling-based dynamic control system of ladle slag in argon blowing refining process