Abstract:Utilizing low-rank coals in power plants takes a risk of slagging, especially when burning coals rich in alkali and alkaline earth metallic (AAEM) elements. To predict the slagging propensity of low-rank coals, this work develops a novel approach for accurately measuring the sticking probability of thermally stable slag samples based on the well-controlled flat-flame system. We collect deposit samples (PSD) severely accumulated on the platen superheater surface of a 660 MW boiler co-firing two low ranks (alkali-rich Phi-coal: iron-rich Ind-coal = 15.2 wt%: 84.8 wt%). It is found that the existing theoretical models can hardly reproduce the measured sticking probability at elevated temperatures. We thus propose an Sshaped nonlinear correlation of ash sticking probability with the melt fraction using two tuning parameters. The fully-sintered PSD slag is mainly composed of refractory anorthite (CaAl 2 Si 2 O 8 ) and hematite (Fe 2 O 3 ), which are largely determined by the dominant Ind-coal ash fed into the boiler. However, the excessive accumulation of PSD can only be attributed to the much stickier Phi-coal ash rich in lowmelting-point, dispersed Na-aluminosilicates. Combining the measured sticking probability and physicochemical properties of the slag and ash samples, we reveal a positive correlation of the ash sticking probability with the sodium content of the samples, almost regardless of the contents of alkaline earth metals and iron. It highlights the leading role alkali metals play in slagging. In contrast, iron exists as discrete hematite (Fe 2 O 3 ) in the slag and is less effective than AAEM in forming slags on the platen superheater. Our work provides a more reliable method and criterion for evaluating the slagging propensity of fully/partially-molten particles in solid fuel combustion. (c) 2021 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

FUZZY COMPREHENAIVE JUDGMENT OF SLAGGING TENDENCY IN COAL-WATER SLURRY FIRED BOILER AT LIAOHE OIL FIELD

APPLICATION OF FUZZY PATTERN IDENTIFICATION FOR SLAGGING CHARACTERISTICS JUDGEMENT IN COAL-WATER-SLURRY FIRED BOILER

Slagging Fuzzy Integrated Judgment Model with Nonlinear Function Based on Coal Ash Component

Application of Fuzzy Set for Slagging Propensity Decision in Boilers Burning CWS

Experimental Investigation of the Scaling-Off Location and the Slag Mass in Pulverized Coal-Fired Boiler with Water-Cooled Slag Removal

A MODEL FOR OVERALL SLAGGING DIAGNOSIS IN PULVERIZED-COAL FIRED BOILERS

A prediction method of slagging behavior for pulverized coal by using test method of sedimendation furnace

An All-around Slagging Propensity Decision Model for CWS

PREDICTION OF BURNING BEHAVIOR FOR PULVERIZED COAL AND ITS APPLICATION ON PRACTICAL BOILERS

Experimental Study on Slagging Monitoring of Pulverized Coal-Fired Boiler Based on Slagging Image

Research Progress of Numerical Simulation of Slagging in Pulverized Coal Boiler

Experimental Study on Slagging Characteristic of Low-volatile Coal Water Slurry in a 220t/h Boiler

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

PRELIMINARY ESTABLISHMENT OF MODEL FOR JUDGING DIFFICULTY AND EASINESS OF PULVERISED COAL IGNITION

STUDY ON SLAGGING BEHAVIOR DISTINGUISHING INDEX FOR BIOMASS FUEL BURNING IN THE FLUID BED

Developing an Indexing Methodology for Estimating the Reactivity of Slag from Different Sources Use in Alkali-Activated Materials

Mechanistic Studies on the Slagging Propensity in Low-Rank Coal Combustion

Evaluation of slagging characteristics for microalgae and lignocellulose: A comparison of aggregative index and model

Slag Characteristic Evaluation Based on Supporting Vector Machine

Assessment of the Slagging Tendency in Power Plant Boiler Furnaces Depending on the Physical-Chemical Characteristics of Ash and Coal

Research on the Dynamic Characteristic of Ash Deposition in Boilers Burning Coal and Coal Water Slurry