Abstract:It is a great challenge to achieve high capacity and long cycling life for hydrogen storage electrode alloys in Ni-MH batteries, especially for superlattice alloys. This work investigates three series of single-phase LaY2Ni10.5- based alloys to tune theCe2Ni7-type superlattice structure and electrochemical hydrogen storage properties by Mn, Al, and Zr substitutions. The Mn, Al substitutions for Ni could reduce the volume difference between [A2B4] and [AB5] subunits, thus greatly improving the cyclic performance. The maximum discharge capacity for the LaY2Ni9.7Mn0.5Al0.3 alloy is 384.1 mAh g-1, and the capacity retention S200 is as high as 76.1%. However, the partial replacement of Y with Zr dramatically reduces the discharge capacity and cycling stability, although the subunit volume difference is even zero in the LaY1.75Zr0.25Ni9.7Mn0.5Al0.3 alloy. Compared with Mn, Al-substituted alloys presenting two hydriding-dehydriding plateaus, the LaY1.75Zr0.25Ni9.7Mn0.5Al0.3 alloy exhibits the sole plateau and a greater lattice strain during charge/discharge, which is responsible for the poor cycling performance. Further, the detailed structural analysis reveals that the charging leads to unusually remarked expansion along the a-axis direction, resulting in considerable lattice strain in the Zr-substituted alloys. This work provides new insights into the design of high capacity and long-life superlattice electrode alloys.

The Cycle Life and Surface Properties of Ti-based AB2 Metal Hydride Electrodes

The Effects of Partial Substitution of Mn by Cr on the Phase Structure, Microstructure and Electrochemical Properties of Ti-Zr-V-Mn-Ni Hydrogen Storage Alloys

A Study on the Cycling Stability of the Ti–V-based Hydrogen Storage Electrode Alloys

Phase Structures and Electrochemical Properties of V2.1TiNi0.4Zrx (x=0−0.06) Hydrogen Storage Electrode Alloys

The Effects of Partial Substitution of Mn by Cr on the Electrochemical Cycle Life of Ti-Zr-V-Mn-Ni Alloy Electrodes of a Ni/MH Battery

Electrochemical Cycle Life of Zr-Based Laves Phase Alloys Influenced by Alloy Stoichiometry and Composition

Structural and Electrochemical Characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) Hydrogen Storage Electrode Alloys

Improvement of electrochemical cyclic durability of Zr-based AB2 alloy electrodes

Electrochemical Behaviors Of A V3tini0.5hf0.24 Alloy Electrode During Charge-Discharge Cycling

Electrochemical behaviors of a V3TiNi0.56Hf0.24 alloy electrode during charge–discharge cycling

The phase structures and electrochemical properties of TiV2.1Nix(x=0.2 similar to 0.6) hydrogen storage alloys

Microstructure and Electrochemical Properties of V2.1TiNi0.4Zr0.06Cux (X=0-0.12) Hydrogen Storage Alloys

Degradation Mechanisms of Ti–V-based Multiphase Hydrogen Storage Alloy Electrode

The Electrode Properties of the Ti1.0Zr0.2Cr0.4Ni0.8V0.8−xAlx (x=0.0,0.2,0.4 and 0.6) Alloys

Corrosion and degradation behavior of Zr-based AB2 alloy electrodes during electrochemical cycling

Phase Structures And Hydrogen Storage Capabilities Of The Alloys (Ml)(X) (Ni3.8co0.75mn0.4ti0.05)

Electrochemical studies on the Ti–Zr–V–Mn–Cr–Ni hydrogen storage electrode alloys

Phase structures and electrochemical behaviors of V2.1TiNi 0.5Hf0.05Crx (x=0-0.152) hydrogen storage alloys

The influence of relative content of Ti and Zr on the electrochemical behavior of Laves phase alloy

Modulating Superlattice Structure and Cyclic Stability of Ce <sub>2</sub>Ni <sub>7</sub>-Type LaY <sub>2</sub>Ni <sub>10.5</sub>-Based Alloys by Mn, Al, and Zr Substitutions

The microstructure and electrochemical properties of Ti0.3Zr0.225V0.25Mn0.3-xNi0.45+x (x=0 similar to 0.25) Ti-based hydrogen storage alloys