Abstract:This paper describes the design and experimental evaluation of a silicon micromachined resonant accelerometer with high scale factor and low temperature drift. The device was fabricated by bulk micromachining and sealed in a hermetic metallic package to ensure the resonator operates with high Q-factor. By optimizing the structure, the scale factor of the resonant accelerometer was increased to 361 Hz/g, which is close to the simulated result of 336 Hz/g taking into account the measurement range of +/- 14g. The bias-temperature drift coefficient fell to 4.4 mu g/degrees C. A digital frequency readout was implemented using a continuous time stamping method. The measured relative resolution within the operating frequency range of the resonator was better than 1.8 ppb at 1 Hz data update rate. Thus, we have produced a miniaturized resonator accelerator without the bulky commercial frequency counters used in our previous work. A test chamber at a constant temperature varying by only +/- 0.01 degrees C was used to characterize the temperature drift of the accelerometer prototypes by isolating the disturbances due to the ambient temperature. After increasing the scale factor and decreasing the temperature sensitivity, the 3-day bias stability was measured to be 2.19 mu g and 0.51 mu g for room-temperature and constant-temperature operations, respectively. Furthermore, the long-term bias stability was 1.77 mu g in 30-day measurements when the temperature variations were controlled to be within +/- 0.01 degrees C. The experimental results indicate that this resonant accelerometer exhibits excellent long-term temperature stability, which offers the promise for high-performance shipborne inertial navigation applications. (C) 2019 Published by Elsevier B.V.

A Self-Temperature-compensated Micromechanical Bridge Resonator

Thermally Excited Micromechanical Vacuum Resonator

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

Temperature-Insensitive Structure Design of Micromachined Resonant Accelerometers

Temperature-frequency Drift Suppression Via Electrostatic Stiffness Softening in MEMS Resonator with Weakened Duffing Nonlinearity

Temperature Self-Compensation of Micromechanical Silicon Resonant Accelerometer

Highly Sensitive Temperature Sensor Based on Coupled-Beam MN-on-Si MEMS Resonators Operating in Out-of-Plane Flexural Vibration Modes

A Temperature-Insensitive Micromachined Resonant Accelerometer with Thermal Stress Isolation

Temperature Distribution and Resonance Amplitude of Thermally Excited Micromechanical Beam Resonators

Self-Temperature-Compensated GaN MEMS Resonators Through Strain Engineering Up to 600 K

Temperature-drift Characterization of a Micromachined Resonant Accelerometer with a Low-Noise Frequency Readout

Temperature insensitive design of MEMS resonant accelerometer

Silicon waveguide-based single cavity Fano resonance temperature sensor

Temperature Compensation of MEMS Resonant Accelerometers with an On-Chip Platinum Film Thermometer

Temperature Compensation In Fluid Density Measurement Using Micro-Electromechanical Resonant Sensor

A micro-mechanical resonator with programmable frequency capability

Temperature insensitive quartz resonator force sensor

Microresonant Accelerometer Composed of Silicon Substrate and Quartz Double-Ended Tuning Fork with Temperature Isolator

A Micromechanical Bridge-Shaped Voltage-Controlled Oscillator

A virtual thermometer with low measuring hysteresis for high performance MEMS resonant sensors