Abstract:Controlled fabrication of metal nanospheres on nanotube tips for optical antennas is investigated experimentally. Resembling soap bubble blowing using a straw, the fabrication process is based on nanofluidic mass delivery at the attogram scale using metal-filled carbon nanotubes (m@CNTs). Two methods have been investigated including electron-beam-induced bubbling (EBIB) and electromigration-based bubbling (EMBB). EBIB involves the bombardment of an m@CNT with a high energy electron beam of a transmission electron microscope (TEM), with which the encapsulated metal is melted and flowed out from the nanotube, generating a metallic particle on a nanotube tip. In the case where the encapsulated materials inside the CNT have a higher melting point than what the beam energy can reach, EMBB is an optional process to apply. Experiments show that, under a low bias (2.0-2.5 V), nanoparticles can be formed on the nanotube tips. The final shape and crystallinity of the nanoparticles are determined by the cooling rate. Instant cooling occurs with a relatively large heat sink and causes the instant shaping of the solid deposit, which is typically similar to the shape of the molten state. With a smaller heat sink as a probe, it is possible to keep the deposit in a molten state. Instant cooling by separating the deposit from the probe can result in a perfect sphere. Surface and volume plasmons characterized with electron energy loss spectroscopy (EELS) prove that resonance occurs between a pair of as-fabricated spheres on the tip structures. Such spheres on pillars can serve as nano-optical antennas and will enable devices such as scanning near-field optical microscope (SNOM) probes, scanning anodes for field emitters, and single molecule detectors, which can find applications in bio-sensing, molecular detection, and high-resolution optical microscopy.

Metal-filled carbon nanotubes for nanofluidic systems: modes of melting and evaporation

Metal-filled Carbon Nanotubes for Nanofluidic Systems; 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2009); ; 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems : IROS 2009 ; St. Louis, Missouri, USA, 10 - 15

Metal-filled Carbon Nanotubes for Nanomechatronics

Nanotube fluidic junctions: internanotube attogram mass transport through walls.

Modeling of thermocapillary flow to purify single-walled carbon nanotubes

Laser-induced Nanoscale Thermocapillary Flow for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes.

Using Nanoscale Thermocapillary Flows to Create Arrays of Purely Semiconducting Single-Walled Carbon Nanotubes

Nanotube Boiler: Attogram Copper Evaporation Driven by Electric Current, Joule Heating, Charge, and Ionization

Effective metal encapsulation of carbon nanotubes by micro-current electrochemical deposition

Water Transport Phenomena Through Membranes Consisting of Vertically-Aligned Double-Walled Carbon Nanotube Array

Amorphization and Directional Crystallization of Metals Confined in Carbon Nanotubes Investigated by in Situ Transmission Electron Microscopy

Suspended Multiwalled Carbon Nanotubes As Self-Aligned Evaporation Masks.

Fundamental Effects in Nanoscale Thermocapillary Flow

Thermal Management for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes Based on Thermocapillary Flow by Pulsed Heating

Nanorobotic Spot Welding by Attogram Precision Metal Deposition from Copper-filled Carbon Nanotubes.

mocapillary fl ow to purify single-walled carbon nanotubes

Nanorobotic Mass Transport

Mechano-nanofluidics: water transport through CNTs by mechanical actuation

Theoretical and experimental studies of nucleation and interface structure between carbon nanotubes and metals

Impact of Single-Walled Carbon Nanotube Functionalization on Ion and Water Molecule Transport at the Nanoscale

Metal-filled Carbon Nanotube Based Optical Nanoantennas: Bubbling, Reshaping, and in Situ Characterization