Abstract:Response characteristics of the atomic absorption spectrometric detector and dispersion contributions of individual components of the flow injection atomic absorption spectrometry (Fl-AAS) system were studied using samples of less than 100-mu-l. The dispersion coefficient D, half steady-state time t1/2 and half steady-state volume V1/2 were used for evaluation. The transport conduits and sample loops in previously reported manifolds were found to be the main sources of sample dispersion. The detector studied had a t1/2 response time of 0.20 s, which was almost independent of the sample introduction rate. Dispersion effects in the nebulizer-burner system, which influence the response kinetics of the detector, generally showed a very limited contribution of the over-all dispersion of the injected samples. Knotted sample loops, and short transport conduits of 0.35 mm i.d., were used in an improved Fl sample introduction manifold in order to limit dispersion. By injecting 45 and 65-mu-l samples, 90 and 98%, respectively, of the steady-state signal from conventional sample aspiration were achieved. The precision and detection limits obtained by peak height measurement at an optimized carrier flow-rate of 4.2 ml min-1 were comparable to conventional methods and were better than peak area measurements by a factor of 2. An absolute detection limit of 3 ng was obtained for lead in the peak height mode with a 35-mu-l sample, compared with 80 ng by conventional steady-state measurements. Tolerance of a high content of dissolved solids in samples was improved and demonstrated by repeated determinations (65-mu-l injections) of 10-mu-g ml-1 of Pb in saturated lithium borate solution at 360 samples h-1 for 1 h with 0.9% relative standard deviation (RSD), and in 30% m/v NaCI solution at 180 samples h-1 with 2% RSD.

Flow Injection Analysis Methods for Determination of Diffusion Coefficients

Determination of Diffusion Coefficients of Proteins by Flow Injection Analysis and Its Application to Estimation of Molecular Masses of Proteins

Research Progress in Determination Methods of Solvent DiffusionCoefficientsin Polymer Systems

Studies on the Chemical Kinetics in Flow Injection Analysis System

Ion Diffusion Coefficient Through Nanochannel

An improved method for measuring the concentration dependence of Fick diffusion coefficient based on Boltzmann equation and cylindrical liquid-core lenses

Flow injection analysis of inorganic cationic species in serum and urine

A Method to Measure the Diffusion Coefficient in Liquids

Flow Injection On-line Photochemically Spectrofluorimetric Determination of Folic Acid in Pharmaceutical Preparations

Ion diffusion coefficient measurements in nanochannels at various concentrations.

Laminar flow-based microfluidic systems for molecular interaction analysis-Part 2: Data extraction, processing and analysis

Analysis of Samples with High Dissolved Solids Content Using Flow-Injection Flame Atomic-Absorption Spectrometry

A Microchip-Based Flow Injection-Amperometry System with Mercaptopropionic Acid Modified Electroless Gold Microelectrode for the Selective Determination of Dopamine.

Determination of diffusion coefficients through gels with non-negligible finite-volume effects in the compartments of the diffusion cell

A New Flow Injection Single-Standard Calibration Method for Flame Atomic Absorption Spectrometry Based on Dilution by Microsample Dispersion

FLow-injection analysis: a new approach to quantitative measurements in clinical chemistry.

Analysis of a microfluidic device for diffusion coefficient determination of high molecular weight solutes detectable in the visible spectrum

Critical Evaluation of the Efficiency and Synergistic Effects of Flow Injection Techniques for Sensitivity Enhancement in Flame Atomic Absorption Spectrometry

Contribution of System Components to Dispersion in the Analysis of Microvolume Samples by Flow-Injection Flame Atomic-Absorption Spectrometry

Conductance Method for the Determination of Ion Diffusion Coefficient Through a Nanochannel

Measurement of Diffusion and Partition Coefficients of Ferrocyanide in Protein-Immobilized Membranes