Abstract:As an important joint material, tantalum (Ta) needs to be studied intensively in terms of wear and corrosion resistance. Two films of Ta/Ti/DLC (diamond-like carbon) (referred to as TD film) and Ta/Ti/TiN/Ti/DLC (referred to as TTTD film) were prepared by magnetron sputtering technology, and their electrochemical corrosion performance in lactic acid and sodium bicarbonate solutions was also investigated. The morphology observation, electrochemical corrosion experiment, and static contact angle measurement were carried out using a scanning electron microscope, electrochemical workstation, and a contact angle meter. This paper mainly discusses and analyzes the corrosion influencing factors and corrosion mechanisms of these two films under two different environments. The 20-day immersion experiments show that the TD film in both solutions results in severe surface corrosion due to its loose structure and many internal defects. In contrast, the surface of the TTTD film with a dense structure, a multilayer structure, and a thicker thickness is not corroded under the same conditions. The electrochemical corrosion experiments show that the corrosion resistance of the TD film is worse than that of the Ta substrate, while the TTTD film has the strongest corrosion resistance, improving the corrosion resistance of the Ta substrate. Although the TD film had a higher sp3 content than the TTTD film, it does not provide protection to the Ta substrate due to increased structural defects in the TD film. The results of the contact angle show that the contact angle of the TTTD film is smaller than that of the TD film in both solutions. However, the TTTD film has the lowest roughness and the densest structure, and thus the TTTD film is more resistant to corrosion. It is finally concluded that the surface morphology and internal structure of the films are the main factors affecting corrosion resistance. This provides an important reference for the application of DLC film in weak alkaline and weak acid environments.

Corrosion Protection of Ultra-Thin Ta-C Films for Recording Slider Applications at Varied Substrate Bias

Different Substrate Materials Effect on Structure of Ta-C Films by Raman Spectroscopy for Magnetic Recording Sliders

Structure and Tribological Properties of Ultra-Thin Tetrahedral Amorphous Carbon (ta-C) Films

Correlations between substrate bias, microstructure and surface morphology of tetrahedral amorphous carbon films

Effect of Substrate Bias on Microstructure and Properties of Tetrahedral Amorphous Carbon Films

Structure and Properties of Ta-C Films Deposited by Filtered Cathodic Vacuum Arc Technology As a Function of Substrate Bias

Structural, Mechanical and Frictional Properties of Tetrahedral Amorphous Carbon Film by Filtered Cathodic Vacuum Arc System

Effect of substrate bias on ta-C films deposited by magnetically enhanced vacuum arc

A Tribological Study of Tetrahedral Amorphous Carbon Films Prepared by Filtered Cathodic Vacuum Arc Technique

Effect of structure on the secondary electron emission of tetrahedral amorphous carbon film

Microstructure and tribological behavior in ta-C films prepared by laser-induced filtered cathodic vacuum arc technique: Effect of charge voltage

Strongly Adhering and Thick Highly Tetrahedral Amorphous Carbon (ta–c) Thin Films Via Surface Modification by Implantation

Substrate Bias Effect on Structure of Tetrahedral Amorphous Carbon Films by Raman Spectroscopy

Corrosion Properties of DLC Film in Weak Acid and Alkali Solutions

Self-adaption Ta/TaC multilayer coating with fine grains: toward excellent corrosion resistance in aggressive environment

Corrosion and Tribocorrosion Performance of M (m=ta, Ti) Doped Amorphous Carbon Multilayers in Hank'S Solution

Preparation and Study of the Tribological Properties of Tetrahedral Amorphous Carbon Film

Corrosion Protection of Ultra-Thin Diamond-Like Carbon Films on Cuprum

Raman Spectra And Mechanical Properties Of Tetrahedral Amorphous Carbon Films Deposited By Filtered Cathodic Vacuum Arc Technology

Stress, Microstructure and Mechanical Properties of Graded Multilayer Tetrahedral Amorphous Carbon Films

Influence of Bias Voltage on Structure and Tribocorrosion Properties of TiSiCN Coating in Artificial Seawater