Abstract:The studies were carried out to diagnose the effects of coarse aggregate type on the mechanical behavior of plain concretes under incremental loading. During the studies mechanical parameters including compressive strength (fcm) and splitting tensile strength (fctm), as well as fracture parameters involving critical stress intensity factor (K_Ic^S) and critical crack tip opening displacement (CTODc) were evaluated. Crushed aggregates covered: basalt (BA), granite (GT) and limestone (LM) and natural peeble gravel aggregate (GL) were used in the concrete mixtures. The composite made on pebble aggregate acted as a reference concrete, as it were, in the analysis of the test results. For better understanding of the crack initiation and propagation in concretes with different coarse aggregates, a macroscopic failure surfaces examination of the tested beams is also presented. Both of the analyzed fracture mechanics parameters, i.e. 〖 K〗_Ic^S and CTODc increased significantly in the case of concretes which were manufactured based on crushed aggregates. They amounted in comparison to concrete based on gravel aggregate at levels ranging from 20% for concrete with limestone aggregate, to over 30% for concrete with a granite aggregate, and to as much as over 70% for concrete with basalt aggregate. Moreover, a clear correlation in the changes in the obtained results between the main strength parameters and fracture mechanics parameters was observed. The fracture process in each series of concrete was: quasi-plastic in the case of gravel concrete, semi-brittle in the case of limestone concrete, and clearly brittle in the case of the concretes based on granite and basalt aggregate. The results obtained help to explain how the coarse aggregate type affects the strength parameters and fracture toughness at bending.

Research on stone concrete Ⅰ type fracture properties of self-compacting pile of large diameter of aggregate

Experimental study on fracture properties of self-compacting concrete

The Comparison of Self-Compacting Rock-Filled Concrete with Large-Size Natural and Recycled Aggregate

Study on strength mechanism of self-compacting rock-fill concrete with big aggregates

Experimental study on Ⅰ-Ⅱ mixed mode fracture performance and influence of crack-depth of self-compacting rock-filled concrete

Effect of Aggregate Type on Mechanical Behavior of Dam Concrete

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Mechanical Properties Study on Recycled Aggregate-filled Self-compacting Concrete Wails

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Study on Axial Bearing Properties of Cast-in-place Concrete Thin-Wall Tubular Piles

EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF COMPOSITE REINFORCEMENTCONCRETE PREFABRICATED SQUARE PILES

ANALYSIS ON BEARING CAPACITY OF DIVING DRY-VIBRATION COMPACTION STONE PILES

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Experimental study on flexural and shear performance of prestressed steel strand ultra-high strength concrete H-type piles

Study on the Material Mechanical Performance of Large Scale Self-Compacting Rock-Filled Concrete

Experimental Study on Cracking Property of Self-Compacting Concrete

Study on the compression capacity of the wall of recycled aggregates self-compacting rock-filled concrete

Comparison of fracture behavior of set concretes based on natural and crushed aggregates

Experimental investigation on the flexural performance and damage process of steel fiber reinforced recycled coarse aggregate concrete

Research on the Mechanical Properties of Recycled Aggregate Concrete under Uniaxial Compression Based on the Statistical Damage Model

Concrete Aggregate-Gradation Effect and Strength-Criterion Modification for Fully Graded Hydraulic Concrete