Abstract:Mordenite composite membranes were prepared by means of coating a porous α-alumina support with nanosized mordenite seeds followed by hydrothermal crystallization. A systematic investigation was performed on the influence of several factors such as ageing of the reaction mixture, alkalinity, salt addition and temperature on the formation of a mordenite membrane on the seeded support. The ageing of the reaction mixture reduces the growth rate of mordenite crystal along a-axis and b-axis but hardly influences the growth rate along c-axis. As a result, the boundaries between the surface crystals become a little larger with prolonging the period of ageing time. The growth rate of the mordenite crystal along individual axes increases first and then decreases with increasing concentration of sodium hydroxide. A higher alkalinity is unfavorable for the formation of a continuous mordenite membrane. The addition of salt in the reaction mixture has different effect on the growth rate of the mordenite crystal along each axis. With increasing the amount of salt, there was hardly influence on the growth rate along c-axis, whereas an obvious decline was observed in the growth rate along either a-axis or b-axis, which enlarges the boundaries between the surface crystals. The growth rate of the mordenite crystal increases more along c-axis than that along a-axis or b-axis with increasing temperature for hydrothermal crystallization. The use of a temperature as high as 473 K produces a membrane composed of bar-like crystals with larger boundaries.

Preparation of porous SiO2 membranes on porous stainless steel supports

Preparation of Mordenite Composite Membranes with Seeding

Effects of porogen EDTA on morphology of porous silica support and preparation of MFI zeolite membrane

Effect of Type and Content of Pore-forming Agents on Properties of Porous Alumina Membrane Support

Preparation of high-performance zeolite NaA membranes in clear solution by adding SiO2 into Al2O3 hollow-fiber precursor

The preparation of zeolite NaA membranes on the inner surface of hollow fiber supports

Preparation of nano-silica hybrid membranes

Synthesis of b-Oriented MFI-Type Zeolite Membrane on Porous Glass Support by in Situ Hydrothermal Crystallization

Morphological Characterization of γ-Al 2 O 3 Membranes Fabricated from Ammonium Aluminum Sulphate

Preparation of zeolite MFI membranes on alumina hollow fibers with high flux for pervaporation

Supported mesoporous SiO2 membrane synthesized by sol–gel-template technology

Preparation of Zeolite NaA Membranes on Macroporous Alumina Supports by Secondary Growth of Gel Layers

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes

Preparation and characterization of tubular porousα-Al_2O_3 ceramic membrane support

Preparation of Asymmetric Zeolite NaA Membrane Layers by Vapor Phase Transfer and Seeded Growth Method

Preparation of Silica Material with High Pore Volume by Precipitation in Membrane Dispersion Reactor

Preparation of zeolite MFI membranes on defective macroporous alumina supports by a novel wetting–rubbing seeding method: Role of wetting agent

Synthesis of porous silica gel and study on the adsorption of cerium

Preparation and Characterization of Al<sub>2</sub>O<sub>3</sub>-Based Composite Membranes by Sol-Gel Method

Al2O3–SiO2–TiO2 Composite Ceramic Membranes from Sol–gel Processing

Ultrasonic-assisted Fabrication of High Flux T-type Zeolite Membranes on Alumina Hollow Fibers