Abstract:Abstract Background The progressive evolution in hip replacement research is directed to follow the principles of bone and soft tissue sparing surgery. Regarding hip implants, a renewed interest has been raised towards short uncemented femoral implants. A heterogeneous group of short stems have been designed with the aim to approximate initial, post-implantation bone strain to the preoperative levels in order to minimize the effects of stress shielding. This study aims to investigate the biomechanical properties of two distinctly designed femoral implants, the TRI-LOCK Bone Preservation Stem, a shortened conventional stem and the Minima S Femoral Stem, an even shorter and anatomically shaped stem, based on experiments and numerical simulations. Furthermore, finite element models of implant–bone constructs should be evaluated for their validity against mechanical tests wherever it is possible. In this work, the validation was performed via a direct comparison of the FE calculated strain fields with their experimental equivalents obtained using the digital image correlation technique. Results Design differences between Trilock BPS and Minima S femoral stems conditioned different strain pattern distributions. A distally shifting load distribution pattern as a result of implant insertion and also an obvious decrease of strain in the medial proximal aspect of the femur was noted for both stems. Strain changes induced after the implantation of the Trilock BPS stem at the lateral surface were greater compared to the non-implanted femur response, as opposed to those exhibited by the Minima S stem. Linear correlation analyses revealed a reasonable agreement between the numerical and experimental data in the majority of cases. Conclusion The study findings support the use of DIC technique as a preclinical evaluation tool of the biomechanical behavior induced by different implants and also identify its potential for experimental FE model validation. Furthermore, a proximal stress-shielding effect was noted after the implantation of both short-stem designs. Design-specific variations in short stems were sufficient to produce dissimilar biomechanical behaviors, although their clinical implication must be investigated through comparative clinical studies.

Relationship between the anatomic form of proximal femoral medullary cavity and the proximal femoral fracture caused by the implantation of anatomic femoral stem

Non-contemporaneous bilateral stem fractures occurring after staged bilateral hip revision using extensively porous-coated cylindrical femoral stems: a case report

The Biomechanical Study of Intertrochanic Fractures Treated with Cemented Femoral Stem

Comparison of Bone Remodeling Between Collum Femoris-Preserving Stems and Ribbed Stems in 1-Stage Bilateral Total Hip Arthroplasty.

Can the Stem Design Affect Fracture Features?

[Analysis on Morphology and Stability of Femoral Hip Prosthesis Based on the Revision Operation].

Finite Element Analysis of Femoral Stress Changes after Total Hip Arthroplasty

Femoral Component Revision Using Extensively Porous-Coated Cementless Stem.

Theoretical analysis of changes in femoral stresses after total hip arthroplasty]

Differences between two sequential uncemented stem sizes in total hip arthroplasty: A comparative biomechanical study and potential clinical implications

Comparative analysis of the biomechanical behavior of two different design metaphyseal-fitting short stems using digital image correlation

Short single-wedge stems have higher risk of periprosthetic fracture than other cementless stem designs in Dorr type A femurs: a finite element analysis

Mechanical Analysis and Reasoning on Fractured Stem Failure after Total Hip Arthroplasty

Uncemented, curved, short endoprosthesis stem for distal femoral reconstruction: early follow-up outcomes

Strain distribution in the proximal human femur after insertion of CF/PEEK femoral stems

Acute Periprosthetic Hip Fractures With Short, Uncemented Femoral Stems

Periprosthetic fractures may be more likely in cementless femoral stems with sharp edges

The Proximal and Distal Femoral Canal Geometry Influences Cementless Stem Anchorage and Revision Hip and Knee Implant Stability

Does femoral stem choice influence fracture type or incidence for direct anterior approach total hip arthroplasty?

The assessment of implant shape-dependent failure mechanisms in primary total hip arthroplasty using finite element analysis

The Cause and Treatment of Fracture of Cemented Femoral Stems after Hip Replacement