Abstract:In current-generation designs of total primary hip joint replacement, the prostheses are fabricated from alloys. The modulus of elasticity of the alloy is substantially higher than that of the surrounding bone. This discrepancy plays a role in a phenomenon known as stress shielding, in which the bone bears a reduced proportion of the applied load. Stress shielding has been implicated in aseptic loosening of the implant which, in turn, results in reduction in the in vivo life of the implant. Rigid implants shield surrounding bone from mechanical loading, and the reduction in skeletal stress necessary to maintain bone mass and density results in accelerated bone loss, the forerunner to implant loosening. Femoral stems of various geometries and surface modifications, materials and material distributions, and porous structures have been investigated to achieve mechanical properties of stems closer to those of bone to mitigate stress shielding. For improved load transfer from implant to femur, the proposed study investigated a strategic debulking effort to impart controlled flexibility while retaining sufficient strength and endurance properties. Using an iterative design process, debulked configurations based on an internal skeletal truss framework were evaluated using finite element analysis. The implant models analyzed were solid; hollow, with a proximal hollowed stem; FB-2A, with thin, curved trusses extending from the central spine; and FB-3B and FB-3C, with thick, flat trusses extending from the central spine in a balanced-truss and a hemi-truss configuration, respectively. As outlined in the International Organization for Standardization (ISO) 7206 standards, implants were offset in natural femur for evaluation of load distribution or potted in testing cylinders for fatigue testing. The commonality across all debulked designs was the minimization of proximal stress shielding compared to conventional solid implants. Stem topography can influence performance, and the truss implants with or without the calcar collar were evaluated. Load sharing was equally effective irrespective of the collar; however, the collar was critical to reducing the stresses in the implant. Whether bonded directly to bone or cemented in the femur, the truss stem was effective at limiting stress shielding. However, a localized increase in maximum principal stress at the proximal lateral junction could adversely affect cement integrity. The controlled accommodation of deformation of the implant wall contributes to the load sharing capability of the truss implant, and for a superior biomechanical performance, the collared stem should be implanted in interference fit. Considering the results of all implant designs, the truss implant model FB-3C was the best model.

The assessment of implant shape-dependent failure mechanisms in primary total hip arthroplasty using finite element analysis

Finite Element Analysis of Femoral Stress Changes after Total Hip Arthroplasty

Theoretical analysis of changes in femoral stresses after total hip arthroplasty]

Differences between two sequential uncemented stem sizes in total hip arthroplasty: A comparative biomechanical study and potential clinical implications

Short single-wedge stems have higher risk of periprosthetic fracture than other cementless stem designs in Dorr type A femurs: a finite element analysis

Analysis of Femoral Components of Cemented Total Hip- Arthroplasty

Periprosthetic femoral bone loss in total hip arthroplasty: systematic analysis of the effect of stem design

Finite element modeling of stress distribution and safety factors in a Ti-27Nb alloy hip implant under real-world physiological loading scenarios

Key Parameters Evaluation for Hip Prosthesis with Finite Element Analysis

Comparative analysis of the biomechanical behavior of two different design metaphyseal-fitting short stems using digital image correlation

Primary stability in total hip replacement: A biomechanical investigation

[Three-Dimensional Finite Element Analysis on Mechanical Behavior of the Bone Remodeling and Bone Integration Between the Bone-Implant Interface after Hip Replacement].

Stress finite element and analysis of femoral defect after artificial hip arthroplasty replacement

Comparison of Early Postoperative Stress Distribution around Short and Tapered Wedge Stems in Femurs with Different Femoral Marrow Cavity Geometries Using Finite Element Analysis

Debulking of the Femoral Stem in a Primary Total Hip Joint Replacement: A Novel Method to Reduce Stress Shielding

Optimizing functionally graded tibial components for total knee replacements: a finite element analysis and multi-objective optimization study

Contributing factors to the initial femoral stem migration in cementless total hip arthroplasty of postmenopausal women

Strategic Debulking of the Femoral Stem Promotes Load Sharing Through Controlled Flexural Rigidity of the Implant Wall: Optimization of Design by Finite Element Analysis

Mechanical Analysis and Reasoning on Fractured Stem Failure after Total Hip Arthroplasty

A novel design of hip-stem with reduced strain-shielding

[Three-Dimensional Finite Element Analysis of Bone Stress Distribution Around the Hip Joint Prosthesis with Stepped Stem].