Abstract:Obtaining reliable zirconia-toughened alumina (ZTA) ceramics brazed joints is highly crucial for expanding their applications. ZTA ceramics were successfully brazed with Ni50Ti50 active filler metals. The interfacial microstructure of ZTA/Ni–Ti/ZTA joints was characterised through SEM, EDS, XRD and Raman spectroscopy. The effects of holding time on the microstructure and shear strength of the joints were investigated. During brazing, both Al2O3 and ZrO2 reacted with the Ni50Ti50 filler and formed a AlNi2Ti + Ni2Ti4O double layer at the interface. ZrO2 involved in the interfacial reaction transformed into oxygen-deficient ZrO2-x, and ZrO2-x particles were present in the reaction layer because of Al2O3 consumption. NiTi and Ni3Ti compounds precipitated at the centre of a brazing seam. With an increase in the holding time, the thickness of AlNi2Ti and Ni2Ti4O gradually increased and more ZrO2-x particles appeared in the reaction layer. The mechanisms of interfacial microstructure formation and evolution were proposed. The maximum shear strength of 138 MPa was obtained for ZTA brazed at 1320 °C for 45 min. Nano-indentation was conducted to characterize the hardness, elastic modulus and plastic deformability of the reaction products, in order to analyse the fracture mechanism of the joints.

Active Brazing of Pure Alumina to Kovar Alloy Based on the Partial Transient Liquid Phase (PTLP) Technique with Ni–Ti Interlayer

Brazing Al2o3 to Kovar Alloy with Ni/Ti/Ni Interlayer and Dramatic Increasing of Joint Strength after Thermal Cycles

Brazing Al<sub>2</sub>O<sub>3</sub> to Kovar Alloy with Ni/Ti/Ni Interlayer and Dramatic Increasing of Joint Strength after Thermal Cycles

Thermal Cyclic Test of Alumina/kovar Joint Brazed by Ni–Ti Active Filler

Partial transient liquid phase bonding of Al2O3 to Kovar with a Ni-Ti filler

Interface Reaction Mechanism of Joining Alumina to Kovar with Ni-Ti Active Filler

Active Brazing of High Purity Alumina to Niobium Metal

Effects of Ti Thickness on Microstructure and Mechanical Properties of Alumina-Kovar Joints Brazed with Ag-Pd/Ti Filler

Microstructure Of Alumina Cerarnic/Ag-Cu-Ti Brazing Alloy/Kovar Alloy Joint

Brazing TiAl intermetallics using TiNi–V eutectic brazing alloy

Enhanced bonding of Al2O3/Al2O3 joints brazed by Ni50Ti50 master alloy interlayer

Interfacial structure and properties of reactive brazing joints of TiAl/Ni-based alloy

Secondary Phase Interaction at Interfaces of High-Strength Brazed Joints made using Liquid Phase Sintered Alumina Ceramics and Ag-Cu-Ti Braze Alloys

Brazing between high purity alumina ceramics and titanium

Brazing high Nb containing TiAl alloy using TiNi–Nb eutectic braze alloy

Effect of Cu interlayer with different thickness on microstructure and properties of Al2O3/Kovar joints brazed with Cu–Ti/Cu/BNi-2 composite filler

Interfacial microstructure and mechanical properties of ZTA/ZTA joints brazed with Ni-Ti filler metal

Microstructural characterization and mechanical properties of ZTA/ZTA joint brazed by Ni50Ti50 filler metal

Brazing Al2O3 to 4J42 Using Ag–Cu–Ti/Cu/BNi-2 Composite Fillers with Different Thicknesses of Cu Interlayer

Brazing ZrO2 ceramic to Ti-6Al-4V alloy using NiCrSiB amorphous filler foil: Interfacial microstructure and joint properties