Abstract:Concrete-filled steel tube (CFST) arch bridges have a high center of gravity and a substantial mass, resulting in a discernible seismic response. Consequently, long-span CFST arch bridges must retain exceptional seismic performance and appropriate seismic control design. In this study, the dynamic response and seismic performance of a unique swallow-type CFST arch bridge when subjected to longitudinal earthquake forces were analyzed using numerical simulation methods. The displacement and axial force response results and their laws of the key bridge components were obtained. Taking into account seismic checking calculations, two damping measures were proposed for the CFST arch bridge, as the relative displacement of the girder end exceeded the allowable value specified. The appropriate design parameters for viscous dampers and lead shear dampers were examined. Additionally, the seismic performance of these dampers was verified through a shaking table test using a 1:16 scale model. The findings indicated that when subjected to Wenchuan Wolong wave action, the relative displacement between the steel box girder and the concrete girder of the bridge was significantly larger, leading to girder end pounding. The limit values were surpassed by 32.5% and 50%, when subjected to the uniform and traveling wave excitations, respectively, thus indicating that the expansion joint was the most vulnerable component. Following the selection of optimal parameters for the dampers, the dampers exhibited the capability to mitigate seismic and pounding impacts. Long-span CFST arch bridges with dampers were found to effectively reduce the seismic response of the skewback strain and vault, as well as the relative displacement of the girder ends. Furthermore, the average maximum damping rates achieved by the viscous damper and the lead shear damper reached 44.9% and 44.6%, respectively.

Study on Application of Viscous Dampers Installed in Continuous Bridges on Elastomeric Pad Bearings in Near-Fault Regions

Seismic Response of Isolated Railway Bridge Subjected to Near-fault Ground Motion

Seismic Response of Rigid Frame Bridge Subjected to Near-Fault Ground Motion with Effect of Axial Force Variation of Pier

Earthquake response of bridges bearing on flexible rubber considering pounding of girders

Ground Motion Frequency Insensitivity of Bearing-Supported Pedestrian Bridge with Viscous Dampers

Seismic Study of an Isolated Cable-Stayed Bridge under Near-Fault Ground Motions

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers

Research on earthquake-reduction design method of continuous girder bridges in a high-intensity earthquake area

Study on Energy Dissipation of Viscous Damper for Long-Span Suspension Bridges

Dynamic and Mitigation Analysis of Seismic Pounding Effect on Multi-Span Highway Bridges Subjected to Spatial Earthquakes

Development of Steel Dampers for Bridges

Yielding Steel Dampers as Restraining Devices to Control Seismic Sliding of Laminated Rubber Bearings for Highway Bridges: Analytical and Experimental Study

Shaking table test study on the seismic control of concrete-filled steel tube arch bridges based on dampers

Parametric Study on Fluid Viscous Damper for A Long Span 3-Pylon Cable-Stayed Bridge Based on Seismic Response Control

Experimental and Analytical Study on Pounding Reduction of Base‐isolated Highway Bridges Using MR Dampers

Seismic Response Analysis and Shock Absorption Control of Self-anchored Cable-stayed Suspension Bridge

Seismic damage control of nonlinear continuous reinforced concrete bridges under extreme earthquakes using MR dampers

Study on design method of energy-dissipating earthquake-reduction along transverse of self-anchored suspension bridge by using lead dampers

Effect of bonding or unbonding on seismic behavior of bridge elastomeric bearings: lessons learned from past earthquakes in China and Japan and inspirations for future design

Design Method of Energy-Dissipated Earthquake-Reduction along Transverse of Long-Span Cable-Stayed Bridges