Abstract:The mechanical properties of the aluminum matrix composite directly affect its application in aerospace, transportation, and other industries. In this study, the effect of TiB 2 particles on the comprehensive properties which includes microstructure, thermal deformation behavior, tensile properties, fracture morphology and hardness of Al-Zn-Mg-Cu alloy was analyzed. Furthermore, the microstructures of these alloys were analyzed using energy-dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and a metallography microscope. The stress–strain curves and dynamic softening of the two alloys were studied using the thermal compression test. Furthermore, a thermal processing diagram was constructed for comparing the safety and instability processing zones of the alloys. The Vickers hardness test and the tensile test were performed to compare their hardness, tensile properties, and fracture morphologies. The results demonstrated that TiB 2 was contributing to the refinement of the grain size. When the deformation temperature and the stress–strain rate were 300–450 °C and 0.01–10 s −1 , the alloy exhibited the same stress-strain variation trend during the thermal compression process before and after adding TiB 2 particles. But the deformation resistance of the alloy was improved and processing instability zones were reduced from 300–320 °C/2.5–10 s −1 and 430–450 °C/0.2–0.5 s −1 to 420–450 °C/0.2–1 s −1 because of the addition of TiB 2 particles. TiB 2 particles could also increase the hardness of the alloy by 71.96% and improve the plastic properties and the fracture stress compared with before adding.

In-situ Reaction Formation of TiB2 Particles and the Effect of TiB2 Particles on the Mechanical Properties of Al-Si-Mg Alloy

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

In situ TiB2 particulate reinforced near eutectic Al–Si alloy composites

Microstructures and mechanical properties of in-situ TiB2/Al−xSi−0.3Mg composites

Effect of In-Situ TiB2 Particles on Microstructure and Mechanical Properties of Mg2Si/Al Composites

Processing, Multiscale Microstructure Refinement and Mechanical Property Enhancement of Hypoeutectic Al–Si Alloys Via in Situ Bimodal-Sized TiB2 Particles

Effects of in situ TiB2 particle on microstructures and mechanical properties of AZ91 alloy

Microstructures and mechanical properties of in-situ TiB<sub>2</sub>/Al-<i>x</i>Si-0.3Mg composites

Microstructures and mechanical properties of in-situ TiB2/Al-Si-Mg composites

Microstructure and Mechanical Properties of In-Situ TiB2/AlSi7Mg Composite Via Powder Metallurgy and Hot Extrusion

Microstructure evolution and enhanced mechanical properties in Al-Mn alloy reinforced by B-doped TiC particles

Effect of In-Situ TiB2 Particles on the Microstructure of Spray-Formed 70Si-Al Alloy

Influence of forming process on three-dimensional morphology of TiB2 particles in Al-Ti-B alloys

Preparation of In-Situ TiB 2 and Mg 2 Si Hybrid Particulates Reinforced Al-matrix Composites

Effect of Ti/B additions on the formation of Al3Ti of in situ TiB2/Al composites

Enhancement of the Strength-Ductility Synergy of Al-Si-Mg Alloys Via C-doped TiB2 Particles

Heterogeneous Nucleating Role of TiB2 or AlP/TiB2 Coupled Compounds on Primary Mg2Si in Al–Mg–Si Alloys

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy

The In-Situ Formation of Al3Ti Reinforcing Particulates in an Al-7wt%Si Alloy and Their Effects on Mechanical Properties

TiB2 Reinforced AlFeVSi Alloy by Rapid-Solidified Powder Metallurgy

Effect of TiB2 addition on microstructure and fluidity of cast TiAl alloy