Abstract:AZ91D, as one of the most widely used casting magnesium alloys, still suffers from inadequate mechanical performances for various applications. Nanoparticles could be used to form high‐performance magnesium matrix nanocomposites. Among all nanoparticles, TiB2 has great potentials to enhance the mechanical property of AZ91D. This paper studies the microstructures and mechanical property of AZ91D‐TiB2 nanocomposites fabricated through solidification nanoprocessing. TiB2 nanoparticles with a diameter of 25 nm are effectively fed into the AZ91D melt through a newly developed automatic nanoparticle‐feeding system. Ultrasonic cavitation is used to disperse these nanoparticles in AZ91D melt for casting. With 2.7 wt% (about 1.0 vol%) of TiB2 nanoparticles addition, the mechanical property of AZ91D is much enhanced (by 21, 16, and 48% for yield strength, tensile strength, and ductility, respectively). Microstructural analysis with optical microscope, SEM, and S/TEM show that α‐Mg grain and a network of massive brittle intermetallic phase (β‐Mg17Al12) are simultaneously refined and modified. Further study suggests that the enhancement of mechanical properties of AZ91D is attributed not only to primary phase grain refinement, but also to the modification of intermetallic β‐Mg17Al12 by TiB2 nanoparticles. A novel solidification nanoprocessing method with liquid state ultrasonic processing and automatic nanoparticle‐feeding system is developed to effectively incorporate and disperse TiB2 nanoparticles into AZ91D melt. The fabricated AZ91D‐TiB2 nanocomposites show much enhanced mechanical properties. The enhancement of mechanical properties is attributed to the simultaneous refinement of primary α‐Mg grains and morphology modification of β‐Mg17Al12 phase networks by TiB2 nanoparticles.

Effects of in situ TiB2 particle on microstructures and mechanical properties of AZ91 alloy

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB2 particles

Effect of Al-Nb-Ti-B addition on microstructures, tensile mechanical and damping properties of AZ91 alloy

Processing, microstructure and ageing behavior of in-situ submicron TiB2 particles reinforced AZ91 Mg matrix composites

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

The Effect of TiB2 Content on Wear and Mechanical Behavior of AZ91 Magnesium Matrix Composites Produced by Powder Metallurgy

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Microstructures and mechanical properties of in-situ TiB2/Al−xSi−0.3Mg composites

Effect of Ti particles on microstructure and mechanical properties of TiP/AZ91 composites

Effect of Ti particles on microstructure and mechanical properties of Mg–9Al–1Zn based composite sheets

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy

AZ91D/TiB2 Nanocomposites Fabricated by Solidification Nanoprocessing

Effects of TiB2 particle and local aspect ratio on microstructure and mechanical properties of an I-shaped TiB2/6061Al composite profile

Effects of nano-sized TiB2 particles and Al3Zr dispersoids on microstructure and mechanical properties of Al–Zn–Mg–Cu based materials

An investigation on grain refinement mechanism of TiB2 particulate reinforced AZ91 composites and its effect on mechanical properties

The Effect of Micron-Sized TiB2 Particles on the Properties of Al6061 Strengthened with 4% TiB2 Nano-TiB2

Microstructures and the improved mechanical properties of AZ91 alloy by incorporating Ti-6Al-4V particles

Effect of Ti/B on fabricating TiB2p/AZ91 composites by employing a TiB2p/Al master alloy