Abstract:In order to obtain a titanium-based PbO2 electrode with high electrocatalytic activity and good stability, A porous β-PbO2 electrode is prepared by electrodepositing on titanium substrate Sn-Sb-RuOx coating. The surface morphology and phase analysis of the porous β-PbO2 electrode prepared at different current density were investigated by SEM and XRD. Results showed that the current density changes the surface morphology and active surface area of the porous β-PbO2 electrode. When the current density is 2 A/dm2, the surface of the porous β-PbO2 prepared by electrodeposition has a uniform porous morphology with a pore diameter of 50-200 µm with main crystal phase of β-PbO2. Influence of current density on the electrochemical activity of the electrode was analyzed using anodic polarization curve, electrochemical impedance spectroscopy and galvanostatic polarization. Results revealed that with the increase of current density, the oxygen evolution potential of the porous β-PbO2 electrode decreases first and then increases while the exchange current density first increases and then decreases. When the current density is 2 A/dm2, the oxygen evolution potential is 2.0075 V(at 0.05 A/cm2) and the maximum exchange current density is 1.77×10-4 A/cm2. According to the electrochemical impedance spectroscopy, when the current density is 2 A/dm2, Qf and Qdl are the largest, Rf and Rct are the smallest, and the RF first increases and then decreases with the current density increases. When the current density is 2 A/dm2, the maximum RF value is 655.7. The results with galvanostatic polarization at current density of 0.05 A/cm2 showed that the electrode has a minimum electrode voltage of 2.05 V at a current density of 2 A/dm2. Accelerated life experiments were carried out in 2 g/L Cl- and 150 g/L H2SO4 bath at 25 °C, and the porous β-PbO2 electrode obtained under the current density of 2 A/dm2 has the longest life, and the electrode life is 68 h, which is 2.5 times of the PbO2 electrode obtained under the current density of 4 A/dm2.

Effect of the Current Density on Electrodepositing Alpha-Lead Dioxide Coating on Aluminum Substrate

Effects of Current Density on Preparation and Performance of Al/conductive Coating/a-Pbo2-ceo2-tio2/ß-pbo2-mno2-wc-zro2 Composite Electrode Materials

Effect of temperature and current density on PbO2 composite electrodes

Preparation And Characterization Of Pbo2 On Aluminum Substrate

Effect of Current Densities on the Microstructure and Electrochemical Behavior of the Porous Β-Pbo2 Electrode

Effect of Current Density on the Structure, Composition and Corrosion Resistance of Plasma Electrolytic Oxidation Coatings on Mg–Li Alloy

Properties of Al/conductive coating/ α -PbO 2 -CeO 2 -TiO 2 / β -PbO 2 -WC-ZrO 2 composite anode for zinc electrowinning

Properties of Al/conductive coating/α-PbO2-CeO2-TiO2/β-PbO2-WC-ZrO2 composite anode for zinc electrowinning

Low temperature atomic layer deposition of PbO 2 for electrochemical applications

Construction of conductive oxide layer on the surface of lead alloy grid for the long life of lead acid batteries

Investigating the effect of current density in ultra-fast electrolytic zinc phosphate deposition

Effect of Electromagnetic/Ultrasonic Compound Energy Field on Electrochemical Properties of Continuous Cast-Rolled Lead Alloy Anode Plate

Effect of Current Density on Preparation and Properties of TF/β-PbO 2 in MSA Media

Substrate and current density effects on electrodeposited aluminium coatings

Study of the Effect of Current Density on the Metallurgical Properties of AlFeCrNiTi High Entropy Alloy Coating Produced by Pulse Plating

Coating effect of Al2O3 on ZnMn2O4 anode surface for lithium-ion batteries

Effects of Co2+ in diaphragm electrolysis on the electrochemical and corrosion behaviors of Pb Ag and Pb anodes for zinc electrowinning

Properties of Anodic Pb(Ⅱ) Film Formed on Lead-Bismuth Alloy

Electrochemical behavior and electro-crystallization mechanism of Cu-Ni/Nano-Al 2 O 3 coating with a deposition current density dependence

Fabrication and Electrochemical Treatment Application of an Al-Doped PbO2 Electrode with High Oxidation Capability, Oxygen Evolution Potential and Reusability

The Mechanisms for the Growth of the Anodic Pb(II) Oxides Films Formed on Pb–Sb and Pb–Sn Alloys in Sulfuric Acid Solution