Abstract:In this paper, the effect of Mn2+ (≤160 mg/L) on the anodic film properties and corrosion behavior of Pb-0.07%Ca-1.25%Sn anodes in acidic CuSO4 electrolyte is clarified. The anode was polarized in an electrolyte containing different concentrations of Mn2+ ions for 48 h to obtain a stable oxide film on the surface. The phase composition and morphology of the oxide layer formed on the Pb-0.07%Ca-1.25%Sn anode after polarization were characterized by the XRD, SEM, and EDS techniques. The influence of Mn2+ (≤160 mg/L) on the electrochemical behavior of the Pb-0.07%Ca-1.25%Sn anode was investigated in 45 g/L Cu2+ and 180 g/L H2SO4 solution via cyclic voltammetry, galvanostatic polarization, Tafel, and EIS measurements. In addition, the anodic weight loss, film formation, and corrosion mechanism of the anode are also proposed. The results reveal that the film formed on the Pb-0.07%Ca-1.25%Sn anode exhibited a gradient Pb|PbSO4|α-PbO2|α-PbO2-β-MnO2 layer in the Mn2+-containing electrolytes. Then, during the oxygen evolution reaction (OER), the gradient layer was oxidized to MnO2, which was irregularly attached to the surface of the substrate and increased the roughness of the film. The presence of Mn2+ accelerated the corrosion of the anode in the electrolyte and reduced the anodic oxygen evolution potential. When the concentration of Mn2+ ions reached 160 mg/L, the corrosion rate was increased by 62.3% despite the anode potential decreasing by 30 mV.

Effects of Co2+ in diaphragm electrolysis on the electrochemical and corrosion behaviors of Pb Ag and Pb anodes for zinc electrowinning

The Effect of Suspended Particles on the Corrosion Resistance of Electrodeposited Zinc Powders

Preparation and Properties of Al/Pb-Ag-Co Composite Anode Material for Zinc Electrowinning

Anodic Behavior of Pb-Ag-Ca-Sr Alloy in Zinc Electrowinning

Properties of Al/conductive coating/α-PbO2-CeO2-TiO2/β-PbO2-WC-ZrO2 composite anode for zinc electrowinning

Properties of Al/conductive coating/ α -PbO 2 -CeO 2 -TiO 2 / β -PbO 2 -WC-ZrO 2 composite anode for zinc electrowinning

Effect of Added Cobalt Ion on Copper Electrowinning from Sulfate Bath Using Doped Polyaniline and Pb-Ag Anodes

Nanosphere interlayer and CeCoO x powder modification for long-life and high-performance electrode applications in zinc electrowinning

Electrochemical behaviors of co-deposited Pb/Pb–MnO 2 composite anode in sulfuric acid solution – Tafel and EIS investigations

Electrochemical Behavior of Rolled Pb–0.8%Ag Anodes in an Acidic Zinc Sulfate Electrolyte Solution Containing Cl− Ions

Oxygen Evolution and Corrosion Behavior of Pb-CeO2 Anodes in Sulfuric Acid Solution

Preparation of cobalt-manganese-modified lead dioxide anodes and the study of their electrochemical performance in electrowinning copper

Effects of Tungsten Carbide on the Electrocatalytic Activity of PbO2-WC Composite Inert Anodes During Zinc Electrowinning

Potential Influence Mechanism of Mn and Co Ions in the Process of Electrowinning of Copper

Effect of Mn2+ on the anodic film and corrosion behavior of Pb-Ca-Sn alloy anode in copper electrowinning

Enhancing the oxygen evolution activity and stability of Pb anode in Mn2+-containing acidic solution by embedding MnCo2O4 particles

Preparation and Properties of MoS2 and Co Double-Doped Modified PbO2/ZnO-NiO Zinc Electrowinning Composite Anode

Influence of Fe Ions on Anode Performance and the Mechanism of Action during Copper Electrowinning Process

A new Co-doped PbO 2 anode for copper electrowinning: Electrochemical and morphological characterization

Two-step facile synthesis of Co3O4@C reinforced PbO2 coated electrode to promote efficient oxygen evolution reaction for zinc electrowinning

Dynamic Evolution of Structure–activity of Anode on Lead Release and Overpotential Change in Zinc Electrowinning