Abstract:The catalytic activity and stereospecificity of olefin polymerization by using heterogeneous TiCl4/MgCl2 Ziegler-Natta (Z-N) catalysts are determined by the structure and nature of active centers, which are mysterious and fairly controversial. In this work, the propylene polymerization kinetics under different polymerization temperatures by using Z-N catalysts were investigated through monitoring the concentration of active centers [C*] with different tacticity. SEM was applied to characterize the catalyst morphologies and growing polypropylene (PP) particles. The lamellar thickness and crystallizability of PP obtained under different polymerization conditions were analyzed by DSC and SAXS. The PP fractions and active centers with different tacticity were obtained with solvent extraction fractionation method. The catalytic activity, active centers with different tacticity and propagation rate constant kp, fragmentation of the catalyst, crystalline structure of PP are correlated with temperature and time for propylene polymerizations. The polymerization temperature and time show complex influences on the propylene polymerization. The higher polymerization temperature (60 °C) resulted higher activity, kp and lower [C*], and the isotactic active centers Ci* as the majority ones producing the highest isotactic polypropylene (iPP) components showed much higher kp when compared with the active centers with lower stereoselectivity. Appropriate polymerization time provided full fragmentation of the catalyst and minimum diffusion limitation. This work aims to elucidate the formation and evolution of active centers with different tacticity under different polymerization temperature and time and its relations with the fragmentation of the PP/catalyst particles, and provide the solutions to the improvement of catalyst activity and isotacticity of PP.

Microtacticity of Polypropylene Fractions Produced by Different Active Sites of Heterogeneous Ziegler-Natta Catalyst

Temperature rising elution fractionation of polypropylene produced by heterogeneous Ziegler-Natta catalysts

Temperature Rising Elution Fractionation of Syndiotactic Polypropylene Prepared by Homogeneous and Supported Metallocene Catalysts

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Polymerization Kinetics of Propylene with the MgCl2-Supported Ziegler-Natta Catalysts—Active Centers with Different Tacticity and Fragmentation of the Catalyst

Polymerization Kinetics of Propylene with the MgCl 2 -Supported Ziegler-Natta Catalysts——Active Centers with Different Tacticity and Fragmentation of the Catalyst

Temperature Rising Elution Fractionation of Polypropylenes Produced by Heterogeneous Ziegler-Natta Catalysts Containing Different Internal Donors

COMPOSITION AND TACTICITY DISTRIBUTION OF PROPYLENE BUTENE COPOLYMER

Characterization of isotactic polypropylene prepared with dimethylsilyl bis(1-indenyl)zirconium dichloride supported on methylaluminoxane pretreated silica

Highly active Ziegler-Natta Catalysts for propylene polymerization (2) effects of Al/Ti ratio and polymerization temperature

Study on the microstructures of polypropylene synthesized by a novel MgCl<SUB>2</SUB>-supported and low Ti-loading Ziegler–Natta catalyst

Characterization of Microstructure of Polypropylene Alloys

Fractionation and Characterization of an Ethylene–propylene Copolymer Produced with a MgCl2/SiO2/TiCl4/diester‐type Ziegler–natta Catalyst

High temperature polymerization of propylene catalyzed by MgCl2-supported Ziegler–Natta catalyst with various cocatalysts

Nonisothermal Crystallization of S-Pp Fractions

Improving Microisotacticity of Ziegler–Natta Catalyzed Polypropylene by Using Triethylaluminum/triisobutylaluminum Mixtures As Cocatalyst

Influence of electron donors on the tacticity and the composition distribution of propylene-butene copolymers produced by supported Ziegler-Natta catalysts

Supported Catalyst Without External Electron Donor for Propylene Polymerization Ii. Tacticity Distribution and Microstructure of Polypropylene

Influence of Syndiotacticity and Annealing Temperature on the Double Melting Peak Behaviour of Syndiotactic Polypropylene

“Two-in-one” Catalysis of Broad/bimodal Molecular-Weight-distribution Polypropylene by a Combination of Ziegler–Natta and Metallocene Catalysts

Temperature Rising Elution Fractionation and Fraction Compositional Analysis of Polybutene-1/Polypropylene In-Reactor Alloys